Search results

You can see in the gauge pic where it says eps meaning power steering Sweet!!!!

I hope its not a nytro body style. Just give me 170hp and I'm happy.Its going to be $17999 in Canada but It's been a while since I made a sled payment I think its time lol

Is a 2006 apex er the same as the rtx and gt except the shocks?? Thanks

I tried the clutch kit and it seems quicker but is very aggressive. On the trail in runs between 8500-9000 rpm and pulls about 10,200. The instructions tell you to run between 10,300-10,700.They want you to remove a rivet if it doesn't turn the rpm but I think it may take some mid range away...

Does anybody know the angle of a hauck helix with the letter H on it? I bought a used hauck clutch kit It has a red sec. spring and black primary spring Thanks

How you doin against Roy's F-1000?He's been braggin again lol

I found a good deal on a bender exhaust for my 2003 rx1,Is there any performance increase or just the sound?I had my stock exhaust gutted and now back to stock.I did like the sound of the gutted one.It would be nice to gain some power Thanks

That is about right.My light comes on around the 110 mark.At 150 I need fuel.A 170 miles is the best I've ever got.Got towed the last 2000 feet too the trailer lol

I seen that post just after I posted Thanks

Is there away of getting a new key for a 2006 apex without buying a new ignition?I know the old polaris's had letters on them and you matched the letter on the key to the right letter on the ignition. Thanks

Looks Hot!!!! Too use the apex taillight did you use the black plastic that goes around the taillight from the apex or the rx1 ?? Thanks

I got the band clamps off without breaking any,quite surpisingly.I see what you mean about grinding the clamps so they get smaller.I did notice that I do need the exhaust donuts. If you remove the 4 muffler bolts will the whole exhaust move back to change the donuts?I just put the stock exhaust...

exhaust band clamps loose I put the stock exhaust back on and noticed, when I removed the gas tank that some of the exhaust rattle was also from the exhaust band clamps closest the motor are loose.Is it possable to tack weld them in place or do you have to replace the clamps?The clamps are...

I noticed at the end of the season that my sled was getting louder.I gutted the stock muffler 2 years ago and just thought it was getting louder.took it apart the other day to install the new take-off exhaust i bought last year on ebay.I found that mine was cracked all away around one pipe,just...

Thats what I thought. 120 degrees seemed way to low

I installed a autometer temp gauge in my 2003 rx1. What temp should it be runnin. It runs between 150-170. I friend of mine did the same and his runs 110-120 degrees. Thanks for any input

I cut the 1/4 inch off the lug just to clear the tunnel protector, not off the whole lug.

ttt

I installed the apex seat on my 2003 rx1 and used the apex bars and 3 nch pvot with all the stock cables. Anothr inch or 2 would be perfect,but its not bad at all.

I installed an inch and a half camoplast cross country 15x121 on my 2003 rx1 I removed a 1/4 inch off the lug to clear the tunnnel protectors.I rode it today on the snow covered lake and works great.Should I gear down because of the higher lug?I have reverse on the sled. I had a 1 1/4 ripsaw on...