Search results

oil change I heard of pouring some in the valve cover plug, but I think gravity wins. My actual level was just over half, after sitting over night screwed in it's at full.

push While adjustment the transfer rod, it's easy to do and will get rid off that push.

push Adjust the transfers rod, so less threads are showing 2 lines from min. and put some Bergstrom Triplepoints, shim ski's and install ski savers

oil change Just did the oil change today on the 08 vector gt, agree with the low panel bolts being a PIA. I opened the valve cover plug, drained the tank, crankcase and replaced the filter. Also I did let her run then checked the oil level, I put about 2.8 quarts in measure just below the H...

pic No, I only took this machine once and took 2 pics of it. Then other one you really don't see them. see below

mirror side panels

The wife's machine was on medium doing the same thing, adjustment the tranfer rod to min or 2 before min. "with less threads showing". Also set the bottom clicker to "rebound" on the front shock to softer.

transfer ski shocks

transfer I set up the wife's vector this weekend. I have the rod set a few lines from min, what a difference that made. I set the rebound to 12 to 14 to soften it up, this help get rid of the rest of the ski lift. Front spring have no pressure which I like. bergstrom triples/ski savers up...

cam My vholdr cam goes dead quick, better in warmer weather 45f plus. My helmetcam with the dvr and all the wires is better for sledding, just put a handwarmer in the pouch with the dvr and get 3-4 hours of video out on it.

doo It's a yellow/black one. LOL The wife has a 08 vector gt

cam Here's a video I made with my helmet cam, enjoy. http://www.youtube.com/watch?v=mrKUShvJ9qI

cam mrKUShvJ9qI

I thought the gt come with a tall. I have a extra tall with the rods for the wife's 08 vec gt

I read that ,but it did not look like it from the pics. Maybe he did then removed it after it fell apart

wear He should have said poor design. I see the 09's have a little oval piece welded on top of the rear arm.

ulmer track rub kit I put one on the wifes new vector. http://www.ty4stroke.com/viewtopic.php?t=21213

sled lucky it did not send you off into a tree.

06 on 08 I put the 06 on the wifes 08 vector gt. I ran in last night in the trailer and notice the the left one just took a little longer to get hot, but was equally as hot once it heated up.

I have a price of $9875 this includes skid plate, 114 studs/w tower nuts,12v dc outlet, heated shield plug in, tall windshield w/ wings, belt, cover. Then I get 300 back from yamaha so $9575.00. Is this a good deal.