1st Oil Change

[Vmax4]

Anyone done an oil change yet? Anyone able to post some torque specs? Anyone have a 2008 Tech Update, or service manual to pull info from?

Thanks,

Steve

 

[cardguy]

try this

 

[Vmax4]

Very helpful. Thanks a ton for your time and effort. I plan on buying a service manual and trying to get a technical update book, but haven't seen one yet. Seems to be unavailable for now.

Once again, Thanks,

Steve

 

[cardguy]

just sent you an email

 

[YAMIDOO]

Looks like it could be very useful if I could only read it.
I'm ready for oil change and not sure where to access filter & drain plug.

 

[cardguy]

everyone else seems to be able to read no problem.

try to help people out and you get this

 

[YAMIDOO]

everyone else seems to be able to read no problem.

try to help people out and you get this

My post was not ment to offend anyone and I'm really sorry if you took it that way.
I'm viewing this post on a 32" Monitor and I still cant read it. I have excellent vision.
I must be doing something wrong, any ideas on how I can expand the images would be appreciated
Thanks in advance,
Tim

 

[nytroguy]

everyone else seems to be able to read no problem.

try to help people out and you get this

My post was not ment to offend anyone and I'm really sorry if you took it that way.
I'm viewing this post on a 32" Monitor and I still cant read it. I have excellent vision.
I must be doing something wrong, any ideas on how I can expand the images would be appreciated
Thanks in advance,
Tim

You should click on the actual image, which will transfer it to whatever photo editing software your computer is defaulted to. You should then be able to magnify it at least once. I can read it on my laptop screen so you should be good with a 32" . Good luck!

 

[YAMIDOO]

Thanks Nitroguy & Cardguy !!!!!!!!!!!!!!!!!!!!

 

[Old Thumper]

Oil change instructions with torque specs are in the owner's manual.