2003RX1mtn mod

[Pinball Wizzard]

carbon fiber tunnel 2inch kick/ rail coolers/ rear cooler
mountain performance 159 skid/ billet rails/ transfer kit/ lightweight front end/ big wheel kit
modified windshield/ reinforced pod
boss seat
2inch riser
belt drive / roled down and back axle
ecp filter kit
10 tooth extroverts
qc1 white knuckle exhaust
left hand throttle
no sway bar
billet spindles
powder pro skis
around 510lbs dry

 

[p0wd3rp1l0t]

nice sled...i can tell u r the leader of the pack!!

 

[FastAction]

pinball how is that tunnel holding up and anymore being made , price? pm me if you like



looks real good

 

[Pinball Wizzard]

Tunnel works great. He has sold alot to the two strokers and is building custom sleds complete for alot of people. The tunnels mountain performance are selling are his. I beleive he is building a 162/16 for an rx1 in Canada. Price is around $1300?.

 

[HYERUP]

Beautiful...

 

[p0wd3rp1l0t]

what'd u do to ur windshield?

 

[Pinball Wizzard]

Just made a straight line up from the carbon fiber cover and cut it and then took around two inches off the top. Got tired of bumping limbs and or turning it over on its side and have the guage pod break. also took the pod off and fiberglassed the inside of the pod and made it one piece, I think the hood will break before the pod now.

 

[pro116]

how much weight did you save with just the tunel.

 

[Pinball Wizzard]

Didn't weigh it off the sled (brackets and coolers were installed after tunnel was mounted) but the blank tunnel weighed around 10lbs.

 

[Jensen]

No turbo? :shock:

 

[Pinball Wizzard]

No torbo yet , have about 10,000 in mods to lghten it up. Also waiting for some reports on supercharger to be posted.

 

[POWERHAULIC]

Very nice

 

[Xtremer]

Looks great..what that cost?

 

[Pinball Wizzard]

The mods on the sled cost me around $10,000 in parts. But that was the cheap part my wife got $500 of clutch parts for drag racing , $4500 worth of light weight parts for her 600mtn , a new xt225 yamaha dual sport $4000 , $1000 for a new set of golf clubs, Etc Etc. But its great to have her involved.
The kicker is that I broke my leg on my third ride last year and no snow this year so I've only got about 600 miles on it since the mods were done. Runs great.