2006 Yamaha Apex Supercharger Build Update

[MrSled]

• Removed the studded rips saw track
• Replaced all suspension wheel bearings
• Replaced upper and lower drive shaft bearing and rebuilt chain-case.
• Add new 1.75 Back Country track
• Installed Igrips in the Back Country
• Reconfigured the tunnel protectors to accommodate the track.

 

[steiner]

Very nice sir.
That shop looks as new as that sled looks

 

[Redbeard]

Nice sled, Tom!

What did you come up with for M20 hyfax?

 

[MrSled]

Very nice sir.
That shop looks as new as that sled looks

It is finally moved out of the shop I was sharing with and build my own.. its my happy place now.

 

[MrSled]

Nice sled, Tom!

What did you come up with for M20 hyfax?

Ordered the DuPonts from Yamaha SMA-DPSSR-PL-OO, those are for Polaris Rails and you just have to cut them off a bit and drill a new hole. Slide on Perfect!!

 

[maim]

looking good!

 

[Macheater]

Sweet ride man! Keeping the ole Apex relevant!

 

[sideshowBob]

Nice!
Those MPI SC kits for the Apex were top shelf Yamaha level quality....just like the Apex.

 

[Gone Blue]

Tom, do you have any close up pics on what the Igrips look like installed in the 1.75" Back Country? G.B.

 

[DGZRT]

We need a Sound bite at idle and then screaming past 10,000

 

[Turtle]

We need a Sound bite at idle and then screaming past 10,000

I have a couple videos of it ripping around in the field. But don't know how to upload them - file size too big.

 

[MrSled]

Tom, do you have any close up pics on what the Igrips look like installed in the 1.75" Back Country? G.B.

It would be same as my Apex 2018 Apex. https://ty4stroke.com/threads/my-2018-apex-50th-xtx.149857/page-2

We need a Sound bite at idle and then screaming past 10,000

Here is is on the Dyno:

 

[MrSled]

I have a couple videos of it ripping around in the field. But don't know how to upload them - file size too big.

Have to upload it to Facebook or YouTube.

 

[Macheater]

Mr. Sled, how did you attach your pod 300 to the top of your gauge cluster? It looks like you used Velcro from what I can tell by the pics. I currently have mine on the top of my handlebar pad but, would like to relocate it to my gauge cluster like you have yours. Just don't want to "lose" it.
Thanks

 

[MrSled]

Mr. Sled, how did you attach your pod 300 to the top of your gauge cluster? It looks like you used Velcro from what I can tell by the pics. I currently have mine on the top of my handlebar pad but, would like to relocate it to my gauge cluster like you have yours. Just don't want to "lose" it.
Thanks

I have a mount plate made thats screwed from the inside out that hard mounts the POD300. In the picture you actually seeing the plate in the gap between.