2010 Nytro mtx click no start

[muffinboy]

So I have a 2010 yamaha nytro, brand spanking new battery but clicks when I turn the key. I've tried jumping the solenoid to see if it would crank but no crank so maybe starter too? Also has a code 37 on and found a wire that was in two, so I reconnected the wire. Still has code 37 but never got it to crank it just clicks.

 

[MrSled]

I would guess start went.

 

[muffinboy]

I would guess start went.

I changed the starter spring time usually it would last longer than this. Last month it would crank but really weak crank so I got a new battery. This is all after connecting a bad wire by the ecu and code 37 is still there

 

[MrSled]

Might be a wire issue.

Starter System Troubleshooting

With all the starting problems this my help save time and money. This link also has helpful info: Relay and fuse location diagram: http://www.ty4stroke.com/viewtopic.php?t=83992

ty4stroke.com

This may help

 

[muffinboy]

Might be a wire issue.

Starter System Troubleshooting

With all the starting problems this my help save time and money. This link also has helpful info: Relay and fuse location diagram: http://www.ty4stroke.com/viewtopic.php?t=83992

ty4stroke.com

This may help

Right, i wonder if that wire is reconnected isn't connected good