2015 SR Viper injector o-rings

[2bustedup]

Apparently I've had a leaking injector since last year, but after sitting this summer it really started leaking. I started it to warm the oil to change and fuel was leaking like a cow on a flat rock. Was able to raise the hood enough to see the injector leaking at the o-ring. My Viper has the MPI 220hp kit with larger injectors. So my question is does anyone know the pn for o-rings I need?
Thanks in advance.

 

[cannondale27]

I would remove injector and O-ring and go to Auto parts store they are pretty common sizes on most injectors. If you can measure it I might have one.

 

[2bustedup]

I would remove injector and O-ring and go to Auto parts store they are pretty common sizes on most injectors. If you can measure it I might have one.

Thanks, I have read where that is being done, but aren't there 2 o-rings, one at the base and one at the fuel rail? Best I can tell the top o-ring is 14mm.

 

[cannondale27]

Yes 2 orings