2020 Pics...

[sideshowBob]

You, Mike and myself are all the same age it looks!

Just Kids!

 

[fatchance]

Just Kids!

If like to think if it's as old farts that just don't want to grow up!. I'll be 54 this year.

 

[ROCKERDAN]

You, Mike and myself are all the same age it looks!

1963 was a good year for future sledheads to be born eh? haha

 

[ROCKERDAN]

If like to think if it's as old farts that just don't want to grow up!. I'll be 54 this year.

Agree brother! Im doing same thing i did when I was in my 20s..lol

Probably not a good thing but hell if I care...haha

Dan

 

[journeyman]

1963 was a good year for future sledheads to be born eh? haha

You betcha!! September here, I think Mike is in July......

 

[XP123]

You guys are all a bunch of young kids! I'm in my second year of collecting social security.

 

[Fast]

I rode a 137 all 2017....I removed the blocks first, nada....then removed the entire rod. Still not what I wanted. Im lighter then many here maybe?....Im around 185lbs and sit right on the tank up front. Only stud up middle.

Unless you have owned and worked on both skids, its hard to understand the differences I found. Being a Doo guy you get used to Rmotion and how it is playful and can be raised in the nose at will.

Dan

So do you have to let off the gas to corner does it still corner flat

 

[Fast]

If you want the 137 to wheelie just modify or remove your block stops to how much slower you want to go across the lake or in the trails ...lol

Not sure who wants there sled to wheelie ,were more concerned about being the first one around the corner

 

[Fast]

Given that the spindles on the new front end are supposedly 1.5 inches longer from the ski bolt to where the lower ball joint is, it will be less likely to have the skis in the air on the 2020's.

Thats good news

 

[lilrez]

Im getting ready for work this morning and have this strange urge to buy a new yamy..

 

[stevewithOCD]

My razors are GREEN.
I better buy new razors before they lure me in the wrong direction...

 

[lilrez]

ya Probably fall apart and cut you up. Hahaaa..

 

[Fleecer]

So do you have to let off the gas to corner does it still corner flat

I usually come into the corner and let off gas just enough to let the front bite into the corner then accelerate out of the apex.

Hard to gas around the whole corner with bog power under the hood.

 

[lilrez]

Hard to gas around the whole corner with 300hp under the hood.

Exactly. I just tried it. No way !

 

[ROCKERDAN]

I usually come into the corner and let off gas just enough to let the front bite into the corner then accelerate out of the apex.

Hard to gas around the whole corner with 300hp under the hood.

Beauty of the transfer....and I am a very active rider. You can make a good skid work with your body and right thumb. Just a blast coming into corners hard, Ski's biting hard with the ACE 8" carbides, then driving thru apex and then hammer out lightening up the nose.