A/F wide band question for those with TD Flasher

[Beerman]

I just went to hook up my AEM wide band along with the TD flasher - just curious what those of you that have this already did with all the extra cable? Did you just coil it up and tuck it somewhere by the oil reservoir?

 

[NYTurbo]

Yeah lots of extra cable. I made a large loop towards the bars and back , ty wrapped to existing wires.

 

[Dieselxtx]

I tied mine to the fuel rail on top of the throttle boddies it looks super clean I can try and get pics tomorrow when I'm at the track

 

[Beerman]

Debating whether I want to coil it up or shorten it by cutting and soldering.

 

[Dieselxtx]

Debating whether I want to coil it up or shorten it by cutting and soldering.

I wouldn't shorten I'll send you some pics of mine most people wouldn't even notice it's there

 

[Beerman]

I wouldn't shorten I'll send you some pics of mine most people wouldn't even notice it's there

Would shortening it cause a problem?

 

[WVTurboLTX]

I'm pretty sure AEM says not to shorten the cable.

 

[Dieselxtx]

The pictures aren't in order but hook up the plugs and install sensor then loop it in half and run both up with the other heat tape wrapped lines and then tie the module end to the fuel rail and the extra slack gets tied under the metal frame tube and runs above the throttle body intake tube as pictured it is very clean looking like factory I can get more pics if needed.

 

[Beerman]

View attachment 130560 View attachment 130557 View attachment 130558 View attachment 130559
The pictures aren't in order but hook up the plugs and install sensor then loop it in half and run both up with the other heat tape wrapped lines and then tie the module end to the fuel rail and the extra slack gets tied under the metal frame tube and runs above the throttle body intake tube as pictured it is very clean looking like factory I can get more pics if needed.

Thanks for the pics. You did plug the ECU end into the harness down by the oil reservoir, yes? Or is there another spot?

 

[Dieselxtx]

Thanks for the pics. You did plug the ECU end into the harness down by the oil reservoir, yes? Or is there another spot?

Yes they are plugged in by the oil res

 

[Beerman]

Yes they are plugged in by the oil res

Much appreciated.