kennyspec
Expert
Not looking forward to closing off this area.... May have to do something straighter with the tube near the fuel tank.
Mountaintech
TY 4 Stroke God
It's getting there!
Sportsterdanne
TY 4 Stroke Guru
I would close it off with Fiberglass, glue some flexible speaker grill cloth to get some nice shapes to it and then brush resin on it let it dry and reinforce it with fiber glass mat, protect everything under it with plastic.
google or youtube car audio fabrication.
google or youtube car audio fabrication.
kennyspec
Expert
I hate using fibreglass lol. I managed to close off the upper portion by the tank.
I also managed to keep the super good fit of the trail tank......
I also managed to keep the super good fit of the trail tank......
Sportsterdanne
TY 4 Stroke Guru
That turned out great !
kennyspec
Expert
A little more progress.
Left side almost done
Got the clutch guard to fit
Closed off!
Started on a hood mount
Left side almost done
Got the clutch guard to fit
Closed off!
Started on a hood mount
Sabaton
Newbie
Very nice, hope it turns out great!
kennyspec
Expert
Got the steering mounted. It may be a bit high right now. I just wanted to get it mounted.
Sportsterdanne
TY 4 Stroke Guru
Are you out riding ? 
kennyspec
Expert
Not out riding yet but there is enough snow now that I could be!!!
Got my steering done.
Got my steering done.
Mountaintech
TY 4 Stroke God
kennyspec said:Not out riding yet but there is enough snow now that I could be!!!
Got my steering done.
Same here!
Sportsterdanne
TY 4 Stroke Guru
Nice !
could you take a pic. of the linkage with the skis straight.
im going to mock up a turbo plenum Before making the steering since i dont want to remake it later, have to get som tubes for that now.
whats left before first ride ?
it will be interesting to hear your toughts on it when you can compare it to a stock Nytro. i have only ridden a Nytro about a mile
could you take a pic. of the linkage with the skis straight.
im going to mock up a turbo plenum Before making the steering since i dont want to remake it later, have to get som tubes for that now.
whats left before first ride ?
it will be interesting to hear your toughts on it when you can compare it to a stock Nytro. i have only ridden a Nytro about a mile
Nikolai
TY 4 Stroke God
Sled looks good, almost done!
I like the Dzus fasteners welded to the tube
When I did mine (I welded 14 of them), I was a little worried about how they'd work out but they ended up working great. I wouldn't hesitate doing it again to attach bodywork.
I like the Dzus fasteners welded to the tube
When I did mine (I welded 14 of them), I was a little worried about how they'd work out but they ended up working great. I wouldn't hesitate doing it again to attach bodywork.kennyspec
Expert
It's getting pretty busy in the engine bay!!
kennyspec
Expert
Nikolai said:Sled looks good, almost done!
I like the Dzus fasteners welded to the tube
Guess where I got the dzus idea from
it is a bit of a pain to mount and weld them but the work out really well in the end. Need to mount the front bumper, fill with coolant, tidy up some wiring, align skis, extend the fuel level harness, extend the gauge harness and it can go out for its first ride!!!!! Almost done !!! Oh I also have to figure out what to do for a headlight lol
