Apex Summer Mod Plans - Post Em Up!

[Judder]

Play toys are Expensive!
Extending 07 Apex GT to a 128" with Hacksaw.
Extending Tunnel, power coated blk to match. Crews Blk Rivits too!
Rails from Hartman.
New drive shaft Bearings all around.
Crews,New Starter Saver. Thank-You very Much!
New plastic Streering bearings.
Sled should be good for a few more miles!
Oh Yea, New 5.7 pilots

I may put in new bearings while I have everything apart just to be on the safe side as well.

 

[Essarex]

Well, I am almost done with my summer mod plan!

Stage 1, 8 psi MPI supercharger.

Blacked out seat strip, and tail pipe covers.

I will post some pics tonight.

 

[Judder]

Well, I am almost done with my summer mod plan!

Stage 1, 8 psi MPI supercharger.

Blacked out seat strip, and tail pipe covers.

I will post some pics tonight.

Very interested in seeingthis. Where did you purchase it and how much horsepower do you think you're going to gain?

 

[Super Sled]

Super Sled's Summer Mods to 07 Attak GT

This will be my biggest mod summer yet on the sled. Visa's stock has doubled and split twice since I began my ambitious indeavor.....



Here are some pics:

Aren't they supposed to look like this in the summer???? (all torn apart?) She won't be back together for a long time I don't imagine.....

Some things I did previously and some mods are ongoing as we speak...

Copper Donuts:

Excell Header:

Mono Skid Beef Up Kit

Also replaced all skid bushings with Pioneer kit, all new wheels and bearings, and all powder coated black:

Installed these earlier in the spring:

Don't mess with my rivet gun!



Gutted Exhast:

Also on the summer mod list:

1. Daytona digital coolant temp guage hard wired into the ignition,
2. OFT steering blocks (already installed),
3. Replacing several parts of stock steering linkage (Got idea from Snowmobileaddict here on TY) (Got parts from Port Yamaha earlier and lready installed!),
4. Ulmer's Front End Bushings (On order for Father's Day per Tyler's mom. I hope they get here soon!!!!!!!),
5. New CR10EK spark plugs from Ulmer (already installed),
6. Removing tunnel protectors (still weighing pro's and con's of doing this, to be quite honest, but leaning towards doing it).......
7. Shiny black Monochrome Windshield with TY VIP Decal/ logo (windshield on back order from Port Yamaha, decal in hand ready to apply!),
8. New Amsoil 0w40 and Filter.




And coming soon........

- Yoshi single pipe exhaust
- PCIII and Ign. Module
- Ulmer's Stealth Airbox Mod

 

[rindtj]

Planning on:

Custom Valved Shocks
13mm Sway Bar
New skis (USI X2 I think)
A little different "setup" from a friend
Custom Seat RE-cushion
Polish Tunnel
Excell Wheels
...Maybe a couple more studs

 

[stevewithOCD]

6200 miles & nothing has been done before except oil changes. Now; front end bushings, shocks rebuilt & re-calibrated, new radiator, new 5.7 ski's, 128" Ice-Ripper, drive bearings, cr 10 plugs, lightweight battery, copper donuts, anything wrong in rear suspension, & lastly a new seat if BOSS starts to make one.$$$$$$$$$$$ I need some OT

 

[driftbuster]

Yamaha Low Snow Small Wheel Kit
Pioneer Hyfax Saver Wheel Lowering Kit
Pioneer Rear Suspension Bushings
Pioneer 4th Rear Wheel Kit
Pioneer 13 mm Swaybar
Halfbaked Beef-Up Kit and Powdercoating

And hoping I still have gas money next winter!

 

[sleddog66]

Yamaha Low Snow Small Wheel Kit
Pioneer Hyfax Saver Wheel Lowering Kit
Pioneer Rear Suspension Bushings
Pioneer 4th Rear Wheel Kit
Pioneer 13 mm Swaybar
Halfbaked Beef-Up Kit and Powdercoating

And hoping I still have gas money next winter!

Where are you putting the low snow kit....front of rails, or behind the double wheels? Is this kit good behind double wheels on an attak model? Does anyone have pics? I have the front curve handled with an anti- stab kit, need to help behind double wheels!

 

[APEX 06]

Paint the tunnel, new track. That's it for me right now.

A New Battery!!!! Rrrrrrrrrrrrrrr


Super Sled it looks like your looking for something.

 

[Lonerider]

my summer build project

I just picked this mess up, I am thinking a supercharger for this one.
Going to need some power to lift the skis!!!

This is the way I get them, just wonder what this person hit??

 

[Super Sled]

Re: my summer build project

I just picked this mess up, I am thinking a supercharger for this one.
Going to need some power to lift the skis!!!

This is the way I get them, just wonder what this person hit??

Pics?

 

[Super Sled]

Super Sled it looks like your looking for something.

Yes! Different various 07 Attak GT parts (nuts, bolts, screws, etc....) that Tyler has spread from one end of the garage to the other......

 

[APEX 06]

Super Sled it looks like your looking for something.

Yes! Different various 07 Attak GT parts (nuts, bolts, screws, etc....) that Tyler has spread from one end of the garage to the other......

I know what you mean my 3 year loves to help me lose parts all the time. And when I ask her where did she put it, she says I don't know you had it last. Lol

 

[ZapeX2]

stretching my 121 to 136 with zx2 skid. Been reading really good reviews about it...

 

[SXlover]

If anything I will be replacing some plastic pieces, Jacobson rollover kit from OFC racing, Ice Age rails, and maybe an MCXpress 290 kit.