Barn Of Parts Oil Tank Gasket Anybody using it ?

[Kuzzy]

10-inch pounds = 1 ft pound. So, 72-inch pounds is 7.2 ft pounds. Easy math!

Umm, I'm fairly certain there is 12" in a foot

 

[RobX-1]

Umm, I'm fairly certain there is 12" in a foot

Tell that to Subway

 

[idontknowjack]

10-inch pounds = 1 ft pound. So, 72-inch pounds is 7.2 ft pounds. Easy math!

Really? there is 12 inches in a foot, so 12 in/lbs is equal to 1 ft/lb.

 

[sideshowBob]

My SW has had the roll over valve bypassed from zero miles and so far no leaks.
Last year I talked to Travis about ordering an oil tank gasket for my SW and he told me if its not leaking leave it alone and don't bother ordering a gasket...stand up guy...I ordered the gasket anyway and added it to My numerous SW spares along with numerous other Apex, VMax, and Moto Ski parts in parts heaven[Attic of My Shop]

 

[Kevin]

Just installed one on a thundercat
Did you guys trim off the excess or just leave it?

 

[Rtbo]

I just left it.

 

[REDLINE 1]

Just installed one on a thundercat
Did you guys trim off the excess or just leave it?

I trimmed off a little of the excess left about a 1/16" hanging out, but certainly not necessary to do. I'm just anial and wanted to make it look nicer lol

 

[Woop Woop]

Just left it hanging out and 3000 miles this year and no leaks with BOP gasket and ROV delete. I did have to watch the bottom of the 5/8 hose through the footwell in deep snow and below zero temps though, snow has a tendency to accumulate right there in the footwell. No issues at all on groomed trail riding ...

 

[Yamarus]

Which bits do I need to use? Torx plus 6IP, 5 IP? The Ribe M6 is not suitable, the Ribe M5 is small. Polydrive bits cannot be found. Maybe it's Torx plus after all?