blown apex
VIP Member
anybody have a clue on a bigger fuel pump that
will keep up on supercharger at 12-16 psi
and still fit in gas tank
what about a pressure port for the plastic line
thanks for any info and part numbers
will keep up on supercharger at 12-16 psi
and still fit in gas tank
what about a pressure port for the plastic line
thanks for any info and part numbers
promod63
Extreme
Just take the stock pump out and replace it with the MSD in line pump. We run 20#'s boost with this set up.
Here is a dyno pull at 19.0#s boost.
http://www.youtube.com/watch?v=vmtJfItkV9g
Here is a dyno pull at 19.0#s boost.
http://www.youtube.com/watch?v=vmtJfItkV9g
aja636
Lifetime Member
check with allen ulmer or you can ask SPEED on here about the in tank pump they used for there super charger
1CrazySledder
Lifetime Member
- Joined
- Aug 11, 2005
- Messages
- 2,006
- Location
- Cartersville, GA.
- Country
- USA
- Snowmobile
- None, looking now!
Here's a good thread to read on this subject.
http://www.ty4stroke.com/viewtopic.php? ... t=msd+pump
http://www.ty4stroke.com/viewtopic.php? ... t=msd+pump
badluck
Extreme
- Joined
- Feb 6, 2006
- Messages
- 100
- Location
- Ballston Spa, New York
- Country
- USA
- Snowmobile
- 06 Apex RTX S/C
09 Nytro RTX
I used a gm vortec pump. slight mods to the stock sending unit but Very simple and clean install, took maybe 1 to 1-1/2 hrs. have about a 1000 hard miles on it with no problems (knock on wood) !
Similar threads
- Replies
- 8
- Views
- 1K
- Replies
- 15
- Views
- 4K