rbell14
TY 4 Stroke Guru
what is the trick to getting a small tube down the chain case fill whole with a small hose to use an evacuator to draw out oil? Seems like all the parts are in the way from getting tube to bottom....
Help!
Help!
Last edited:
My evacuator has a stiff 1/4dia tube that works great. Can see it through the sight glass. I push it toward the back of the case and down.
rbell14
TY 4 Stroke Guru
I tried like hell to get my extractor tube to the bottom but seemed like it always ran into something stopping it. Tube is firm and smaller in diameter. I finally just popped lose the bottom 6 screws and it began to drain.
Wish it was easier than this.
Wish it was easier than this.
ViperBill
Pro
I cut a 45 at the bottom of the hose and when it catches something I'll give it a twist. Easy once you get the hang of it.
DeerHuntr
TY 4 Stroke Guru
I used a straw for an undergravel aquarium filter, works great. It's stiff ¼" diameter clear acrylic material. Goes to the bottom super easy.
Similar threads
- Replies
- 3
- Views
- 379