JROCK
TY 4 Stroke Junkie
- Joined
- Oct 25, 2007
- Messages
- 544
- Location
- Ottawa, Ontario
- Country
- Canada
- Snowmobile
- 2006 Yamaha Apex GT
Has anyone had a coolant leak from the two pipes that go into the top of the cylinder head? At the end of the season i noticed a pool of coolant there at the one closest to the front of the engine (timing chain side). My buddy also mentioned he had the same problem both sleds with about 10,000km. Is it just the seal that has to be replaced or has the pipe cracked?
Thanks
Justin
Thanks
Justin
grader
TY 4 Stroke Master
if you remove the allen head bolt the pipe will lift up out of the head. it has an "o" ring on it, and might need replacing. i doubt that the pipe is cracked, but check it when you remove it.
JROCK
TY 4 Stroke Junkie
- Joined
- Oct 25, 2007
- Messages
- 544
- Location
- Ottawa, Ontario
- Country
- Canada
- Snowmobile
- 2006 Yamaha Apex GT
Are those allen head bolts stubborn to get out or should i heat them up before i take them out? Ill change both o rings at the same time! thanks grader
grader
TY 4 Stroke Master
the bolts can be pretty tight so use a good quality metric allen wrench to avoid problems.
JROCK
TY 4 Stroke Junkie
- Joined
- Oct 25, 2007
- Messages
- 544
- Location
- Ottawa, Ontario
- Country
- Canada
- Snowmobile
- 2006 Yamaha Apex GT
Will do!! Did you have a leak on your sled? Did you have a leak at that o-ring? Havent really seen anyone else post with this problem.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
Jaybaar
Lifetime Member
- Joined
- Feb 22, 2021
- Messages
- 22
- Age
- 50
- Location
- New Hampshire
- Country
- USA
- Snowmobile
- 16 SR Viper LTX DX
03 Yamaha RX1
I'll jump in here, I just picked up an 04 RX1 and discovered that same issue AFTER I got home. I assumed it was an o-ring. I'll let you know after I tear into it
mapo
Newbie
Know its been a while but same thing happened to me, was it the o ring?I'll jump in here, I just picked up an 04 RX1 and discovered that same issue AFTER I got home. I assumed it was an o-ring. I'll let you know after I tear into it
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
Jaybaar
Lifetime Member
- Joined
- Feb 22, 2021
- Messages
- 22
- Age
- 50
- Location
- New Hampshire
- Country
- USA
- Snowmobile
- 16 SR Viper LTX DX
03 Yamaha RX1
It was the o rings - replaced with new ones I had from a kit I bought at Harbor Freight.
mapo
Newbie
Ok hopefuly its my issue to, im also concered with the colour, the coolant is a rusty brown colour, not dex stuff. will be flushing with new stuff and hopefully it doesnt turn that color again.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
Jaybaar
Lifetime Member
- Joined
- Feb 22, 2021
- Messages
- 22
- Age
- 50
- Location
- New Hampshire
- Country
- USA
- Snowmobile
- 16 SR Viper LTX DX
03 Yamaha RX1
Good luck, let me know how you make out.
Similar threads
- Replies
- 6
- Views
- 1K
- Replies
- 24
- Views
- 3K
- Replies
- 1
- Views
- 896
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.