Doo fuel can on xtx

[Sask Attak]

Is it possible to put a Ski doo jerry can on the back of an xtx without under-tunnel exhaust?

 

[radianguy]

I have seen pics on here of a stock XTX w/Doo gas can.

 

[Sask Attak]

bump

 

[Eagle1]

Did you see this thread in the mountain section? some pics in here.
http://www.ty4stroke.com/viewtopic.php?t=71380

 

[gregdec1]

2011 XTX with Doo Fuel Caddy

Here is a pic of my 2011 XTX with a doo fuel caddy installed. Was pretty easy to install. I had to get rid of the tail light and installed a low pro LED tail light and exhaust turn out. Works awesome and looks pretty good too.

 

[Filks]

Little off topic, but where did you score that small windshield on your sled?

 

[boritzer1234]

Little off topic, but where did you score that small windshield on your sled?

That's the same windshield that can be found on a 2008 Fx Nytro RTX. They only had these for one year. Some people sell their used ones because they want something bigger. I know I did.

 

[Filks]

Ya I hear ya - looks cool though! Thanks for the info. Tank on the back of the sled looks cool too. Does the turn out keep enough heat off the tank? I thought I read of a few guys that melted theirs.

 

[gregdec1]

You can order the low profile chrome windshield from any yamaha dealer. The exhaust turn out keeps all the heat away form the can. I put over 230 km one day and it didn't get hot at all. I can see it getting hot if you didnt have the turn out.

 

[Groomer08]

it gets hot if you do like 100mph for miles on end too.(with the turn out)
its the HOT setup. lol.

do a undertunnel...add a fuel can and a bag and keep your tailllight. huge weight savings ditching stock can.honestly...its like a honda civic muffler under there.

 

[newfie09xtx]

How many litres do these gas cans hold?

 

[xf800spro]

Its a 3 gallon can. Here is a pic of mine.

 

[alsops]

Brp fuel caddy

I noticed you don't have a turnout
I just had the same set up but put a turnout and heat foil near the turnout
I also noticed I have to tighten the. Strap to the last notch...do you?

 

[xf800spro]

Yes that picture was taken before the turnout was put on, and yes I did put on some heat tape just in case but it works just fine.

 

[h20rocket]

just happen to see this ad on cl, and this post, thought someone might be interested in it, have no idea what there worth

http://nh.craigslist.org/mcy/3425780593.html