FX Nytro Clutch Kits

[Srxspec]

FX Nytro, FX Nytro RTX, FX Nytro RTX SE Models

Stage 1: $385
Increases of 2-3 sled lengths down low and through the midrange with 3-4 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix

Stage 2: $550
Increases of 2-3 sled lengths down low and through the midrange with 6-7 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix
-Top Gear
-Chain
-Windage Plate Kit

FX Nytro XTX Model
Stage 1: $375
Increases of 2-3 sled lengths down low and through the midrange with 3-4 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Billet Helix

 

[EsonPZ]

How would the stage 1 kit work with a 1,72" track?

 

[Srxspec]

For a 1.75" track we use a different helix and secondary spring. The added traction of the taller track will show significant increases in the low to midrange acceleration as well as a much better backshift than stock.

 

[JcHawk]

Allen
Do you have any clutch kits ready for the XTX?

 

[Srxspec]

Just uncrated the XTX last night. I believe we will have just the Stage 1 kit for the XTX.

 

[justinator]

Just uncrated the XTX last night. I believe we will have just the Stage 1 kit for the XTX.

Allen did you take a peek to see what the xtx has for gearing??

 

[Srxspec]

XTX has the same gearing as the regular FX Nytro models. 21/39

 

[Bpatch50]

Stage 1: $385
Increases of 2-3 sled lengths down low and through the midrange with 3-4 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix

Stage 2: $550
Increases of 2-3 sled lengths down low and through the midrange with 6-7 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix
-Top Gear
-Chain
-Windage Plate Kit

I will have Stage 1 kits in stock January 3, 2008 and hopefully Stage 2 kits January 10, 2008.

what exactly is the windage plate kit?

 

[no4smoke]

Just uncrated the XTX last night. I believe we will have just the Stage 1 kit for the XTX.

Why just the Stage 1 kit for XTX??

 

[Srxspec]

Stage 1: $385
Increases of 2-3 sled lengths down low and through the midrange with 3-4 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix

Stage 2: $550
Increases of 2-3 sled lengths down low and through the midrange with 6-7 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix
-Top Gear
-Chain
-Windage Plate Kit

I will have Stage 1 kits in stock January 3, 2008 and hopefully Stage 2 kits January 10, 2008.

what exactly is the windage plate kit?

The windage plate kit is two plates that cover up the exposed fins on the secondary. This usually picks up 1-2 mph on top end.

 

[landscape88]

Stage 1: $385
Increases of 2-3 sled lengths down low and through the midrange with 3-4 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix

Stage 2: $550
Increases of 2-3 sled lengths down low and through the midrange with 6-7 mph gain on top end. Engagement RPM is 3600.
-Primary Spring
-Super Tip Weights
-Secondary Spring
-Billet Helix
-Top Gear
-Chain
-Windage Plate Kit

I will have Stage 1 kits in stock January 3, 2008 and hopefully Stage 2 kits January 10, 2008.

what exactly is the windage plate kit?

The windage plate kit is two plates that cover up the exposed fins on the secondary. This usually picks up 1-2 mph on top end.

Has anyone had any experience with the Stage Two clutch kit and its claims?

 

[mad4snow]

you can trust Allen if he says 2-3 sleds lengths and 6-7 mph on top you will get atleast that much and probly a little more more times than not

 

[kmwharley]

anything for a MTX running below 2500 ft?

 

[Srxspec]

We have setup our own MTX at 1300 foot elevation using the same basic components as our Stage 1 clutch kits. We can set you up with a MTX clutch kit if you would like.

 

[Daranello]

Can you add the windage plates to the XTX stage 1 kit??? If yes how much?