sneakattak88
Expert
putting the 136" x2 Boivin, but i have a rear added heat exchanger, will it get it now? Hope now, dont need any more problems
sneakattak88
Expert
i meant will it get HITsorry
Read this http://www.ty4stroke.com/viewtopic.php?t=56504
I have one on my mnt sled and no problems, but as you can see in the post people have had issues.
I have one on my mnt sled and no problems, but as you can see in the post people have had issues.
Sasquatch
Lifetime Member
- Joined
- Apr 17, 2004
- Messages
- 3,699
- Location
- North Western Ontario
- Website
- www.dptc.com
- Country
- Canada
- Snowmobile
- Yamaha's
Track hit my exchanger on my warrior. Added thicker protectors Bottoms out on the protectors. I'm adding an Apex rad and removing the exchanger from my Warrior. I'm going to look real close at the tunnel end and will trim it if I need to.
My other option was installing it up into the extension so it fit flush. But I want to make a small rack back there so it would be in the way.
My other option was installing it up into the extension so it fit flush. But I want to make a small rack back there so it would be in the way.
