HELP ME FIX MY RX-1

hazlenutpie

Newbie
Joined
Feb 24, 2006
Messages
1
Reaction score
0
Points
361
I was driving yesterday...and about a kilometer down the river, my machine died. It sounds like it wants to turn over, and the fuses look fine. What could be the problem? I can smell the gas so it's getting fuel. Is it possible for plugs (4) to go in the beginning of a ride? I did let it idle for about 25 minutes, but it was -25 C outside! What are my odds of it being something inexpensive?

Greg
 
I had a problem with my ignition switch connection. It was loose....and the same thing happened to me.
 
Put a plug into a coil and crank the engine over. If there is no spark generated than it is something electrical, perhaps the ignition switch connection as suggested or another electrical connection. Make sure all the electrical connectors are plugged in. There was also a problem with the wiring under the tool box in the front having the insulation worn off due to rubbing on the frame. It is probably something very simple.
 
If the timing CHAIN broke (very uncommon???) he's in trouble. No way have the valves got enough clearance. Must have atleast eaten the head and a couple pistons, hopefully not the block too. Man, that sucks!!!
 
There are alot of top ends out there. Typically its the crank bearing or rod bearing that goes.

Get a set of used pistons from a R1..they are cheaper and the same. Valve job and back in business.

Otherwise Im looking for a motor just like yours. If you part it out.
 


Back
Top