HELP sucking noise from rs vector after replacing stator/ oil change

[Zack]

Hi I am really starting to regret buying this sled as I have had nothing but problems with it Scince I bought it. Ok, here goes I bought the sled knowing that I had to put a stator in it, it turned out I had to pull the engine to do the job... So I put the new stator in and everything seemed fine(used the old gasket don't know if it matters) but then I turned off the sled and there was an odd sucking noise. Originally I thought the noise was coming from the oil tank but after looking at it it is coming from the breather hose inside of the airbox. If I take the dipstick out of the oil tank and run it there is no sucking noise when I shut it off, also the oil is foaming up. Any help at all would be greatly appreciated thanks

 

[hibshman25]

Are you sure you have the hoses hooked up correct to the check valve assembly?

 

[bombsquad]

pretty sure its normal mine makes the same noise and they told me it was normal. I have a 05 vector.

 

[Zack]

Ok, thanks I just wanted to make sure because I just bought the sled

 

[Yogi_12]

My 2011 Venture (carbed) does it

 

[thrasher]

O6 Vector, same sucking noise for a few seconds after shutting it off. Most likely oil passing thru that valve assembly in the airbox. Totally normal.

 

[RacinJason15]

Like wise mine just had a stator put in it as well.. makes the sucking noise after shutdown..

 

[derrickps]

My 2010 carbed venture has a noise after shutdown since new. Just the oil finishing circulating