I have heard you mention while talking about the RA and M-10, upgrading the springs in the M-10 for heavier guys to prevent bottoming. I'm pushing 290, and with all the adjustablity of the M-10 are the standard springs going be enough. I know they rate them up to that weight but was wondering what you thought. FYI, the shocks are Fox zero Comp. Doesn't sound like they are adjustable.
If I were to upgrade the springs which ones would I do?
What about upgrading the rear shock only to a Ohlin?
Also have you used the Cam-it before ? What;s your opinion on the Jack vs. the Cam-it? meaning cost / conveinance.
Also in th "bolt and go" RX-1 install, do you have to cut the Yamaha spacers on the front shaft to fit in the stock mount brackets yourself or did they come that way? The unverisal directions mentions nothing about this.
Also when you installed the rear brackets on the rear shaft first, doesn't that make installing the skid very difficult cuz you have to lift the track over the brackets..etc.etc.
If I were to upgrade the springs which ones would I do?
What about upgrading the rear shock only to a Ohlin?
Also have you used the Cam-it before ? What;s your opinion on the Jack vs. the Cam-it? meaning cost / conveinance.
Also in th "bolt and go" RX-1 install, do you have to cut the Yamaha spacers on the front shaft to fit in the stock mount brackets yourself or did they come that way? The unverisal directions mentions nothing about this.
Also when you installed the rear brackets on the rear shaft first, doesn't that make installing the skid very difficult cuz you have to lift the track over the brackets..etc.etc.