soltys
Newbie
So I'm servicing my 2006 Nytro and after I changed the oil (2 Litres in then fire then add the third Litre) I go to fire the sled again and I've got the '!' warning lamp on that won't go off. I brought the sled up to temperature and checked all the levels again and everything seems O.K.
So I need some help as to what to do or try next.
Thanks.
So I need some help as to what to do or try next.
Thanks.
theCATman
TY 4 Stroke Master
You happen to forget to plug the sensor wire back into the dipstick after adding the 3rd bottle?
soltys
Newbie
No - that was what I thought of first - that the connection was dirty or I accidentally got oil on it. But everything is connected and clean.
theCATman
TY 4 Stroke Master
No code flashing, just the "!" symbol?
Are you low on fuel? That's the only time that light comes on without a code flashing that I can think of.
Are you low on fuel? That's the only time that light comes on without a code flashing that I can think of.
yox185
TY 4 Stroke Master
There should be another icon on. Gas, temp., oil, or engine.
soltys
Newbie
You know that I didn't even think of that. I've got the sled elevatated now to service the front end and maybe it was enought to put the little fuel I have to go to the back of the tank.
I'll give that a look. One of those things that makes the mind fear the worse especially right after an oil change.
I'll give that a look. One of those things that makes the mind fear the worse especially right after an oil change.
Acanuk16
Newbie
- Joined
- Feb 1, 2021
- Messages
- 3
- Age
- 44
- Location
- NE Minnesota
- Country
- USA
- Snowmobile
- 2011 RS Venture GT
I just had a simmilar experience. I was bleeding the coolant system and when complete, I took it for a spin. The yellow triangle with the exclamation point came on. I naturally thought that I didn't get the coolant system bled properly and it was over heating. It had a "_000" code associated with it. I had 2 bars on my fuel guage but added 5 gallons of fuel. The warning went away. I re-bled the coolant again for good measure. Took it for a rip and haven't had any issues so far.
Kenjeepman78
Extreme
Same for me I bought my 2015 vector in august did a full service, a arm bushings all bearings, plugs oil change got snow and took it out the warning light was on. Freaked me out being my first Yamaha and digital dash thought I messed it up. Ended up being barely any fuel
Similar threads
- Replies
- 21
- Views
- 5K
- Replies
- 3
- Views
- 278
- Replies
- 0
- Views
- 1K