Nytro - Full Power Performance (FPP) Stage 1 Trail Turbo installation

[Boosted Moose]

Hi Folks,

I'm new here but have already benefited a lot from the wealth of information - thanks to all the contributors.

I recently picked up a 2009 Nytro XTX and a "gently used" FPP Stage 1 kit that I am preparing to install now. The kit appears to be more than complete (even came with a modified 3 into pipe, etc) and I have been able to figure out the rough mock-up from pictures users have posted here and the FPP website, but I would feel a lot more confident that the install would be right (the first time) if I had a copy of the detailed FPP instructions which, I am told, were originally supplied with the kit.

I have searched the forums but have not found these instructions; I have not yet tried direct messaging any members who previously posted regarding FPP kits since most of the posts were close to ten years old.

I have contacted FPP directly but was informed that the instructions are on a computer at the shop that is not connected to the internet (I did get a message saying a copy would be transferred via zip and emailed to me but have not yet received anything, and I know those guys are extremely busy). I am hoping to work on the install today/this weekend so any helpful information for getting this project done right would be greatly appreciated.

 

[MrSled]

Hi Folks,

I'm new here but have already benefited a lot from the wealth of information - thanks to all the contributors.

I recently picked up a 2009 Nytro XTX and a "gently used" FPP Stage 1 kit that I am preparing to install now. The kit appears to be more than complete (even came with a modified 3 into pipe, etc) and I have been able to figure out the rough mock-up from pictures users have posted here and the FPP website, but I would feel a lot more confident that the install would be right (the first time) if I had a copy of the detailed FPP instructions which, I am told, were originally supplied with the kit.

I have searched the forums but have not found these instructions; I have not yet tried direct messaging any members who previously posted regarding FPP kits since most of the posts were close to ten years old.

I have contacted FPP directly but was informed that the instructions are on a computer at the shop that is not connected to the internet (I did get a message saying a copy would be transferred via zip and emailed to me but have not yet received anything, and I know those guys are extremely busy). I am hoping to work on the install today/this weekend so any helpful information for getting this project done right would be greatly appreciated.

Not a very common kit on the forums is probably why you don’t find any info. I would contact them direct if you can. Good luck trying to get ahold of them. It takes time.

 

[mbarryracing]

I have this PDF copy for the stage 1, but it says it's too large to upload. PM me an email and I can try to send it to you.

 

[Boosted Moose]

I think I have an old copy for the stage 1. PM me an email to send it to.

Thanks a lot for all the responses and especially to redrider18 for getting me the info I needed.

Now if I can just get FPP to send me details on the low comp pistons and fuel delivery upgrades I’ll really be in business!