pcv ptî problem not powering down

[Joe ltx-le]

after changing some settings on my pcv pti , the unit will not power down. the pcv pti auto tune and pod 300 all stay on even with the key removed. im sure it would drain the battery, the only way to turn them off is to unplug the main harness.

anyone experience this problem or have any insight

 

[MrSled]

after changing some settings on my pcv pti , the unit will not power down. the pcv pti auto tune and pod 300 all stay on even with the key removed. im sure it would drain the battery, the only way to turn them off is to unplug the main harness.

anyone experience this problem or have any insight

Had this happen on a friends sled that the gems would not power down. For some reason the ecu was stuck on. Remove negative on battery for a few min and it fixed our problem. Maybe it will help u too. Never stayed stuck on for the test of the day for and seam to cure the problem.

 

[Joe ltx-le]

Thanks man. This seemed to fix my issue also. For now anyway.

I found an annomely with the isc relay. It seems to have power all the time and was buzzing with the key off. But I'm not an electrician and I can't figure that one out.

 

[MrSled]

Thanks man. This seemed to fix my issue also. For now anyway.

I found an annomely with the isc relay. It seems to have power all the time and was buzzing with the key off. But I'm not an electrician and I can't figure that one out.

Cat junk..

 

[Studroes144]

My gems didn't power off one time either and I did exact same thing just unhooked negative on the battery, never did it after that

 

[Joe ltx-le]

Damn gremlins.

 

[cannondale27]

Joe its just resisting the demand for power!

 

[Joe ltx-le]

If it resist anymore it will be sidewinderd And sitting on the dealer floor