MIDWAY
Extreme
- Joined
- Feb 12, 2008
- Messages
- 107
- Location
- SE, MN
- Country
- USA
- Snowmobile
- 2015 Yamaha Viper LTX SE with Push Turbo
Lately I have had a problem with my belt slipping, especially after riding hard. It looks wet and oily in the clutch/belt area. Can't see anywhere that it is leaking but I'm thinking I might have a oil leak somewhere by the primary clutch. Has anyone had this problem or had an oil leak in this area? Is there a certain problem spot or gasket?? Thanks Guys
MIDWAY
Extreme
- Joined
- Feb 12, 2008
- Messages
- 107
- Location
- SE, MN
- Country
- USA
- Snowmobile
- 2015 Yamaha Viper LTX SE with Push Turbo
Also I have had some oil spots on the concrete when my sled sits overnight, under the clutch side area.
totallyamaha
Veteran
check the crank breather hose that goes from the engine to the air box. it is on that side of the machine
MIDWAY
Extreme
- Joined
- Feb 12, 2008
- Messages
- 107
- Location
- SE, MN
- Country
- USA
- Snowmobile
- 2015 Yamaha Viper LTX SE with Push Turbo
Just rerouted my aftermarket breather filter awhile ago thinking that was my problem, but it wasn't.
MIDWAY
Extreme
- Joined
- Feb 12, 2008
- Messages
- 107
- Location
- SE, MN
- Country
- USA
- Snowmobile
- 2015 Yamaha Viper LTX SE with Push Turbo
Check out the thread "here's a new one". I think that is my problem. Hey totally, who works on your RX-1 around here. I'm in Eyota.
totallyamaha
Veteran
i do all of my own work just get parts from fix
fast1200gp
Extreme
check the seal around the pto shaft (behind the primary clutch)pull the primary and see if its wet behind there,,,,if so undo the pto bolts on the cover and the cover bolts and change seal..and cover gasket,,,my seal was leaking,,,
Similar threads
- Replies
- 1
- Views
- 807