ditchrider
Newbie
- Joined
- Jan 27, 2009
- Messages
- 3
I bought this sled for my girlfriend to ride and am very disappointed in it. Went to the black hills and rode this past weekend and the temp light would come on all the time when we were riding in 6-8 inches of new snow. The antifreeze is full and the front heat exchanger would get so much slush packed in there and would be a gap between the slush and heat exchanger. What are the fixes to eliminate this? Need something quick to fix it or it will be forsale and I will be buying her something diffrent.
cdsgraphic
Extreme
close at least the rear (large) hole in the tunnel... this alone makes a huge difference. next thing is to get the radiator fan.
ditchrider
Newbie
- Joined
- Jan 27, 2009
- Messages
- 3
I have the sides all enclosed. Does yamaha make the part to close the large hole or do you need to make it?
bnsf205
Extreme
Tunnel closed and fan for me and no light since.
ditchrider
Newbie
- Joined
- Jan 27, 2009
- Messages
- 3
Where can you buy the tunnel cover and how much do they cost and also what does the fan run?
Just make your own tunnel cover and see if Yamaha will give you the fan.
pat the rat
Lifetime Member
got my fan for free from yamaha,if you complain,i think they will give you one,
phazertp
Veteran
Check out this site for closing off you tunnel. Looks and fits great. A little more expensive than doing it yourself, but its going to look way more professional.
http://www.excellmotorsports.com/
http://www.excellmotorsports.com/
PattyJack
Pro
The kit yamaha provides is ok also, but i think with some reflective tape you could you practically the same thing at a fraction of the price.
08RTX
Extreme
Here is the Yamaha kit price from Port Yamaha. You should be able to pick it up from your local dealer for about the same cost. It is a nice kit. There are some posts about it a while back.
http://www.portyamaha.com/fiche_select. ... 1-50152-00
http://www.portyamaha.com/fiche_select. ... 1-50152-00
iwant1
Extreme
aluminum plate 11 1/2 X 25 is what i used cost me less than $15. complained to yamaha about the overheating and they installed fan for free aswell as both lower ball joints. I bought mine used and they still came good for it.
RIGIDONE
TY 4 Stroke Master
I belive the fan kit is a manditory dealer update, along with a few other things on the 2007 Phazers. Mine also had the temp light come on until I told my dealer about it, he asked if I had the fan update. I got the fan and closed the tunnel and have never had a problem again even on warmer days and low snow conditions.
Phrazer
Newbie
Fan was only an update in the US not Canada. Canadians have to contact Yamaha, not the dealer and hope they will cover. That's what I'm doing right now.
Ruckus
TY 4 Stroke Master
Phrazer said:Fan was only an update in the US not Canada. Canadians have to contact Yamaha, not the dealer and hope they will cover. That's what I'm doing right now.
Are you sure? Mine was done by the dealer.
bush wacker
Extreme
i got mine from my dealer also, i didnt even ask for it they just put it on for me.
Similar threads
- Replies
- 20
- Views
- 4K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.