Qs3-R Question

[SuperTurbo]

Anyone know the actual "FOX" part # for the LE front and rear shocks?
The Yamaha factory will not work in this situation, reason is I have a store credt at a place the does not deal with sleds BUT they can get me any Fox shocks I need. Is there any numbers on the actual shocks maybe one of you could search for me? I've been online for couple hours trying to cross referance.

 

[SaskAttack]

You can't go to www.foxracing.com and get the numbers there?

 

[SuperTurbo]

You can't go to www.foxracing.com and get the numbers there?

Yeah did that, if you do the make and model it only offers the Evol's.

 

[ROCKERDAN]

You need to call fox.....Or email them.

I had some specific issues with FOX Evols I ordered few yrs ago, and got wrong ones. I made contact with them thru their email on their site. After a couple weeks I got a reply from someone high up at fox. He knew all part numbers and just about anything else on specs.

You might be able to call too, but I was not in a hurry and did it all thru email.....I dont think I still have his email but I would go that route, and they can certainly get you proper shock to order from the LE model.

GENERAL SALES + SERVICE
MIDWEST / SOUTH / NORTHEAST

13461 Dogwood Dr.
Baxter, MN 56425
p 831.740.4619
f 831.768.7026

pssalesmw@ridefox.com

Dan

 

[SuperTurbo]

I will start there..Thanks Dan!!

 

[XP123]

Dan the man comes through again!

 

[SuperTurbo]

Yeah I was a little disappointed on how long it took for him to get the intel? LOL slacker...

Thanks again sir!!

 

[Runnin' scared ll]

https://www.denniskirk.com/fox-racing-shox/2-0-zero-qs3-ski-shocks-850-04-001.p106357.prd/106357.sku

 

[SuperTurbo]

https://www.denniskirk.com/fox-racing-shox/rear-track-shock-kit-853-99-120.p106336.prd/106336.sku

Those are the ones I purchased and do not fit, they are good on length but the reservoir is angled left not centered, if you look close to the pic you can see it a and hits the intercooler tubes for the fronts. And the rear shocks do not have the adjuster knob.

 

[Runnin' scared ll]

Those are the ones I purchased and do not fit, they are good on length but the reservoir is angled left not centered, if you look close to the pic you can see it a and hits the intercooler tubes for the fronts. And the rear shocks do not have the adjuster knob.

That's weird. Are you selling them? I have an SE and could possibly upgrade.

 

[SuperTurbo]

That's weird. Are you selling them? I have an SE and could possibly upgrade.

Well that's what I have a SE also trying to upgrade. The place I purchased said they are going to exchange them for the correct units. But if you want them hey I'll sell em to you.

 

[Runnin' scared ll]

I guess they wouldn't fit mine either so that does not make any sense I guess.
Would like to to see the LE and SE side by side. Can't see how there could be a difference.

 

[SuperTurbo]

Well this sucks for me and my credit.
Hi Brian,

I believe that the model you are describing is a Yamaha OEM shock, and only available through them. The only aftermarket shock that we make for the Sidewinder is a FLOAT 3 EVOL R.

Thank you,



Tom Whitehead

FOX Customer Service Rep./Sales

Powered Vehicle Division

ATV | Moto | Snowmobile | UTV





twhitehead@ridefox.com

Direct 831.740.4706

13461 Dogwood Dr, Baxter, MN 56425

 

[GlennM]

Ok this might be a stupid question but on the Qsr3, the rebound adjuster, is the "+" faster rebound? I'm guessing yes but not sure. Mine is too bouncy whereas my buddies Polaris Rush is so plush on the bumps.

 

[Runnin' scared ll]

I can't see how the chassis could be different. Stop into a dealer and try to compare.