jw8844
Newbie
I have a 2008 FX NYTRO and just bought a rear heat exchanger ,also have a trail tank ,was wondering if I would have any probems installing the heat exchanger
Daranello
Suspended
I guessing no, obly because the MTN guys are running trail tanks and there sleds come from the factory with the rear cooler
justinator
Lifetime Member
- Joined
- Mar 25, 2007
- Messages
- 1,471
- Reaction score
- 1,169
- Points
- 1,438
- Location
- Maine
- Country
- USA
- Snowmobile
- 2023 Arctic Cat Riot 9000
No you shouldnt, I added the rear exchanger to my xtx as well as a trail tank. The trail tank is there newest design so I dont know if that matters but everything fits okay,
**sj**
Lifetime Member
- Joined
- Mar 2, 2004
- Messages
- 6,064
- Reaction score
- 969
- Points
- 1,983
- Location
- southeastern Mich
- Country
- USA
- Snowmobile
- 2019 SRX
from what seth@ trailtanks told me...theres been three generations of the tank...I know for sure the last fits but the priors I doubt!
thats why I bought the latest model istead of a used 2nd gen
thats why I bought the latest model istead of a used 2nd gen
rhoag
Expert
I think I have one of the first gen tanks..the fit isn't the greatest but, works.sj said:
Grimm
TY 4 Stroke God
- Joined
- Apr 15, 2005
- Messages
- 4,989
- Reaction score
- 234
- Points
- 1,573
- Location
- Ottawa, Ontario
- Country
- Canada
- Snowmobile
- 2018 MXZ 850
The toughest part of the exchanger install is dealing with the new hose that installs to the top of the stock exchanger, hose #8 I think, according to the instructions. It's a very tight fit and not much wiggle room. I just did this last night.
bagadonitz
TY 4 Stroke Junkie
I recently went through this and ended up getting a new trail tank.
See my post here:
http://www.ty4stroke.com/viewtopic.php?p=684605#684605
I wasn't comfortable jamming the old tank back in pinching off the hoses for the additional cooler in the process. It wasn't even an issue of being comfortable, the tank just simply would not go back in place at all, even with the steering loop loosened. The top hose coming out of the new cooler sticks up that much as can be seen in this picture:
See my post here:
http://www.ty4stroke.com/viewtopic.php?p=684605#684605
I wasn't comfortable jamming the old tank back in pinching off the hoses for the additional cooler in the process. It wasn't even an issue of being comfortable, the tank just simply would not go back in place at all, even with the steering loop loosened. The top hose coming out of the new cooler sticks up that much as can be seen in this picture:
