Executive1
Newbie
- Joined
- Mar 30, 2006
- Messages
- 10
- Reaction score
- 0
- Points
- 361
I have a 04 RX1 with 3500 miles. The steering is very sloppy left to right. It has about an inch of play. Has anybody has this problem. I would like to know where to go from here. There are alot of ball joints and bushings in there. I didn't want to purchase all of them if I don't need to.
Thanks!!
Craig
Thanks!!
Craig
Yamaha205
Pro
Ya the stearing can turn a bit form left to right and the skis dont move, mine does that too and i know 3 other rx1 and apex owners who had the same thing. i think its normal. 



maxdlx
Lifetime Member
- Joined
- Feb 27, 2004
- Messages
- 1,832
- Reaction score
- 92
- Points
- 1,108
- Location
- Tipton, Iowa
- Country
- USA
- Snowmobile
- 07 Apex RTX
I have the same issue on my warrior, just not enough time to fix it before I leave for Muni. There are 6 plastic bushings, go in 3 places that need replaced. There was a thread on here last week about it. try searching for it. Maxdlx

kinger
VIP Member
- Joined
- Jan 17, 2005
- Messages
- 7,403
- Reaction score
- 1,539
- Points
- 1,963
- Location
- Clear Lake, IA
- Website
- www.piergenius.com
I have all brand new bushings and I still have about a 1/2" the bars move forward and backward with the skis not moving. There is no way ti eliminate all slop, this is MUCH better then when I started it had like 2"!
Your ok for another year or so. Then I woudl replace everything even the A-arm bushings
Your ok for another year or so. Then I woudl replace everything even the A-arm bushings
Rove44
Extreme
how and where do you replace the bushings?
Similar threads
- Replies
- 17
- Views
- 5K