SD 08 code - replacement 18$ saturn actuator??

[waldo1]

so sick of this chaincase - SD 08 pooped up today - again - just replaced actuator motor 13 months ago - again - saturn makes a very similar actuator motor - its on ebay for like 18 bucks - anyone try it? part number is 82101 - looks like the plug is on the wrong side but so what...??

 

[Big_Phil]

so sick of this chaincase - SD 08 pooped up today - again - just replaced actuator motor 13 months ago - again - saturn makes a very similar actuator motor - its on ebay for like 18 bucks - anyone try it? part number is 82101 - looks like the plug is on the wrong side but so what...??

Its the same on, just there is a right hand/left hand motor, you need to order the correct one.

Also, you can take apart the actuator, clean it, and it will most likely still work. They seem to get corrosion in them and fail.

 

[jonlafon1]

Its the same on, just there is a right hand/left hand motor, you need to order the correct one.

Also, you can take apart the actuator, clean it, and it will most likely still work. They seem to get corrosion in them and fail.

When you say take apart and clean. Could you explain some more please. Like what did you find.
Thanks

 

[NYTurbo]

Also check your upper gear bushing for wear. This causes reverse issues.

 

[tsiceman]

Did you change drive belt? Too tight on belt deflection will cause sd 08

 

[actionjack]

guy in this video takes one apart. Anybody identify the Saturn or other part number?

 

[34pontiac]

guy in this video takes one apart. Anybody identify the Saturn or other part number?

Saturn l300 right front door window motor

 

[actionjack]

Saturn l300 right front door window motor

Thanks. I took mine apart like the guy in the video and definitely had moisture inside but no visible corrosion. The gear assembly under that cover was definitely tough to turn. I cleaned it up and greased but no luck.

 

[waldo1]

came in today - looks great - alum frame instead of plastic, plug is on the wrong side but theres enough wire to plug in.

 

[actionjack]

came in today - looks great - alum frame instead of plastic, plug is on the wrong side but theres enough wire to plug in.

So you have successfully installed one of these and it fixed your reverse?

 

[waldo1]

i bought a cat part and installed it last week - not removing it just to test... it finally works - fur now... junk.

 

[ClutchMaster]

Reclock the plastic gear, they strip easy.

https://ty4stroke.com/threads/sd-08-code-only-when-put-in-reverse.158517/

 

[actionjack]

Had mine apart and unless I am crazy that gear is metal not plastic in mine. I did take the circlip off but could not get the large round gear out. Im going to take it apart again to try to clean it and get synthetic grease in there. It definitely has resistance to turning and that seems like the problem for mine. Getting to the dealer is a hassle so for $18 I'd check out the Saturn or other adapted part but ultimately I'll take advantage of the warranty before she goes to Maine for the season.

I can find the parts being mentioned but not for $18.

 

[74Nitro]

Sd08

 

[74Nitro]

Sd08

I know that picture doesn't exactly show much, but that gap beside the armature is supposed to have a brush showing, but it's stuck in the holder.