• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

SD_39 Code

Smithsco

Newbie
Joined
Aug 21, 2021
Messages
14
Age
57
Location
Riverview
Country
Canada
Snowmobile
2020 Sidewinder S-TX
I recently got an MBRP Trail Can for my Sidewinder, installed it, and sounds great.

The installations instructions stated that while it wasn't necessary, it was recommended I also install a Tuner, as any aftermarket Exhaust should have a tuner.

I bought a Dobeck EJK Plug and Play Tuner, and now am getting the SD_39 code.

I am about to disconned the Tuner, but before I do, thought I would put this out here to see if this is something I need ot be concerned with.

Thanks
 

Without an AFR module and readout so you can adjust fuel or the ability for that device to read AFRs to control your fuel supply I don't see how it can work.
Sorry to say this but if it were me I would immediately remove this device before it harms your engine. If you don't want to spend much money just buy a basic performance muffler tune from Hurricane or TD and enjoy miles of smiles with reliable power. In the mean time put your stock muffler back on until you get a proper tune....998 engines are not easy or cheap to rebuild.
JM.02c
 
If its like the MBRP muffler I saw on sled come thru here. It has a smaller outlet than stock! We pulled it off and installed a 2.5" Hurricane trail muffler so the machine could breath. It had a tune in the ECU for the larger known muffler.


You need to be careful putting certain mufflers on these sleds. They can will hit the boost cut, over rev and/or hurt engines depending on the circumstances.

Myself, I wouldn't use either item you bought I can only guess from eBay, but stick with products from the known reputable tuners that have been out there for years. Their tunes and mufflers go together as a package.
 
I just had a 2017 come through with a MBRP muffler(can you even call it that?) which then had a code 26.
New owner says put stock muffler back on. Done.
 
If its like the MBRP muffler I saw on sled come thru here. It has a smaller outlet than stock! We pulled it off and installed a 2.5" Hurricane trail muffler so the machine could breath. It had a tune in the ECU for the larger known muffler.


You need to be careful putting certain mufflers on these sleds. They can will hit the boost cut, over rev and/or hurt engines depending on the circumstances.

Myself, I wouldn't use either item you bought I can only guess from eBay, but stick with products from the known reputable tuners that have been out there for years. Their tunes and mufflers go together as a package.
This is the exhaust I have:


Can you tell if it's like the one you removed?
 
Mike, do you think it'd be OK if he bought a Hurricane stage one tune and told them it had a slightly higher flow muffler?
 

Attachments

  • FB_IMG_1705365135162.jpg
    FB_IMG_1705365135162.jpg
    70.2 KB · Views: 70
Ok, thanks. I'm not sure why an exhaust would activate that one.
Mike?
 
Mike, do you think it'd be OK if he bought a Hurricane stage one tune and told them it had a slightly higher flow muffler?


Well knowing it has a smaller outlet than stock, I'm not sure it flows more ultimately. It is louder however so who knows unless you'd flow it on a flow bench. I know it was killing the power on a PM tuned sled!

Ok, thanks. I'm not sure why an exhaust would activate that one.
Mike?

No, I'm trying to understand that one, but I'd suspect it has to do with that fuel Dobeck fuel controller possibly not correctly installed or throwing the code perhaps. Lots of electrical connections there. 6 for the injectors alone, and then the power and ground. So I'd be more looking towards that being the culprit more so.
 
Well knowing it has a smaller outlet than stock, I'm not sure it flows more ultimately. It is louder however so who knows unless you'd flow it on a flow bench. I know it was killing the power on a PM tuned sled!



No, I'm trying to understand that one, but I'd suspect it has to do with that fuel Dobeck fuel controller possibly not correctly installed or throwing the code perhaps. Lots of electrical connections there. 6 for the injectors alone, and then the power and ground. So I'd be more looking towards that being the culprit more so.
Ah, I bet you're right, it's one of those ones that ties into the system in the injector harness I'm thinking. I've seen that type used on ATV's and such. Tripped the code.
 


Back
Top