Something new in the works for Thunder Products

[Doowithblue]

So we don't get a factory adjuster then? I thought Yamaha was putting one on for the final production units?
Sorry I'm out of the loop got some reading to do I guess.

 

[NOS-PRO]

Here's an idea, how about incorporating the push bolt and a hex drive for the locking collar in one tool. Like a allen hex wrench with a threaded end.

Tried that, problem came where it was not enough material to make the threads from hex and total time and money to Lonn was not going to happen cause he wanted to keep cost down.

 

[cannondale27]

Just weld a bolt to the Allen wrench.

 

[NOS-PRO]

There ya go

 

[Doowithblue]

Do these allow the secondary to float?

 

[shagman]

Do these allow the secondary to float?

When you are moving. Yes they float like they normally do.


Sent from my iPhone using Tapatalk

 

[yamaha06]

Will the belt adjuster tool I had on my viper work on the sidewinder? It wasn't made from thunder products I forget who made it.

 

[Doowithblue]

Osp

 

[yamaha06]

Osp

That's right, thanks.
So will the one from osp work on the sidewinder?

 

[thor452]

That's right, thanks.
So will the one from osp work on the sidewinder?

might want to post that on OSP's thread.

 

[super1c]

Took ten minutes to I stall and so far I love this thing. Putting the belt back on was a piece of cake. Adjusting seems super easy. Waiting till snow flies for final adjustment on belt height but initial set up looks real close. Couple pics!

 

[Doowithblue]

Looks like a gates carbon on there!

 

[cannondale27]

Took ten minutes to I stall and so far I love this thing. Putting the belt back on was a piece of cake. Adjusting seems super easy. Waiting till snow flies for final adjustment on belt height but initial set up looks real close. Couple pics!

8bv21 is the number on your Helix? Adjuster looks like should work nice!

 

[super1c]

Looks like a gates carbon on there!

It's a new 8DN. I would run the gates but my wife can get us the 8DN's from work for cost.

 

[super1c]

8bv21 is the number on your Helix? Adjuster looks like should work nice!

Not sure on #'s but its a stock viper helix.