Bluebullet
Lifetime Member
- Joined
- Mar 19, 2005
- Messages
- 1,096
- Reaction score
- 295
- Points
- 1,328
- Location
- Massena NY
- Country
- USA
- Snowmobile
- 2021 sidewinder LTX GT, 2010 Apex LTX GT
- LOCATION
- Maine
So here is the deal, Speedo bearing failed causing speed sensor failure, Limped back to the truck. I have replaced the bearing( New used to limp rest of season) Speed sensor fails throws code 42 and 84. 42 speed sensor issue, 84 tors issue???? Ordered new bearing and speed sensor( won't be in until end of march........ Can I run without speedo? Tors remains active now...... Tried unplugging the speed sensor, no change
Thanks Terry
Thanks Terry
Bluebullet
Lifetime Member
- Joined
- Mar 19, 2005
- Messages
- 1,096
- Reaction score
- 295
- Points
- 1,328
- Location
- Massena NY
- Country
- USA
- Snowmobile
- 2021 sidewinder LTX GT, 2010 Apex LTX GT
- LOCATION
- Maine
sled is a 2010 Apex LTX gt
craiger68
VIP Member
- Joined
- Jan 10, 2008
- Messages
- 38
- Reaction score
- 54
- Points
- 993
- Location
- Wausau, Wisconsin
- Country
- USA
- Snowmobile
- 2020 SRX LE
2020 Viper LTX GT
2007 Attack
You need to bypass the TORS. Here is an explanation copied from another thread:
"To bypass TORS locate the rubber boot beside headlight and their is two single black and white connectors. Plug the black and white together coming from the throttle bodies(closer to the floor) and voila it's bypassed...it takes one min"
If you do a search on here for 'TORS bypass' you will find many posts that include pictures.
"To bypass TORS locate the rubber boot beside headlight and their is two single black and white connectors. Plug the black and white together coming from the throttle bodies(closer to the floor) and voila it's bypassed...it takes one min"
If you do a search on here for 'TORS bypass' you will find many posts that include pictures.
