all, i am trying to find out what stud length i can use on the new ripsaw track. i want to be able to use roetin studs. i called them and though they were unable to tell me at this time what length to use, they sent me one of each length they offer. problem is it appears the 1.180 is too short and the 1.343 is too long.i used the 1.080 last year(on the 1" track) and although it left scratches on the heat shield they were fine. so i guess i am also wondering if they increased clearance to accept a longer stud since the lug is 1/4" taller?
1.343 is the right choice. I can get you a good deal on these. Let me know if you would like a price. Thanks...BBY
YamahaRx-Warrior
Expert
Install in middle of track only. No outside edges or you'll have a costly trip..
Last year I rode on good snow conditions Had 144 woodys picks. With poor traction to the ground I could never stay hooked up with the fingure track. No studs in my warrior this year. I think I am best without them because I see a fair a mount of rocks at times and bent all the studs fast.
Long picks are not for me
Justin
Last year I rode on good snow conditions Had 144 woodys picks. With poor traction to the ground I could never stay hooked up with the fingure track. No studs in my warrior this year. I think I am best without them because I see a fair a mount of rocks at times and bent all the studs fast.
Long picks are not for me
Justin
Similar threads
