supercharger belts???

[obile]

just bought a s/c for my 07 mtn looks as though the belts could be replaced.anyone have the part belt numbers to order from local parts supplier? how much do they cost and where do you s/c guys buy them?
also curious about the special transmission fluid used in the s/c?

 

[TurboJamie]

The belts are available from a local gates supplier.

The Oil in the supercharger is supposed to be propriatary to the rotex charger and should only be bought direct from your provider. I swear the stuff smells identical to this stuff we use in a CVT transmission on a machine here at work and looks the same.

 

[obile]

ANY BODY HAVE THE BELT PART NUMBERS AND MORE INFO ON THE OIL?

 

[TurboJamie]

The belts should have the numbers on them. I can check for you this weekend I will be with my seld.

 

[BlgsRX-1mtn]

Here's the cheapest place to get the Traxion oil for the SuperCharger. This should last you a while. www.w2wpowertrain.com/c-83-rotrex-maintenance.aspx

Jim

 

[obile]

THANKS JIM added to favorites any info on belts. the numbers on mine are unreadable?

 

[BlgsRX-1mtn]

THANKS JIM added to favorites any info on belts. the numbers on mine are unreadable?

The best place I could find was by going to http://www.gates.com/industrial/distributors/index.cfm?location_id=3342 and typing in my local zip code. I haven't gone to any of my local distributors yet but when I do; I'll just take my belt along with me. The guys there should be able to match the belt even though the numers are now gone.

I'm not sure it helps but I'm fairly certain that MPI is using a 14 mm wide PowerGrip GT 2 belt and pullies on these applications. Here's the direct link to the belt at Gates http://www.gates.com/brochure.cfm?brochure=921&location_id=743. Just take the belt to your local distributor for a cross reference to get the needed length.

Jim

 

[whitee]

Heres the part# 6008mgt20 and here. http://www.frenchgerleman.com/frenchger ... 07-834.pdf is what it should cost! It is way down about the middle of the page
Hope this helps, Jason.

 

[BlgsRX-1mtn]

Heres the part# 6008mgt20 and here. http://www.frenchgerleman.com/frenchger ... 07-834.pdf is what it should cost! It is way down about the middle of the page
Hope this helps, Jason.

Thanks, for the info Jason. So did Kord sell his TRX-1? I noticed he had it listed on SW a while back.

Jim

 

[obile]

anyone got the part # for the other belt

 

[Srxspec]

---------------------

 

[Srxspec]

Updating this post with correct information.

Apex/RX-1 Supercharger belts
-Crank to Supercharger jackshaft: 6008mgt20
-Jackshaft to Supercharger: 3848mgt20

Vector Supercharger belt:
6408mgt20

 

[JayyDee92]

Any buddy every problems with they’re belt slipping off ?

 

[kinger]

Any buddy every problems with they’re belt slipping off ?

You have to make sure they are aligned and tensioned correctly. Its quite a process to align them.
Check out the vid to see my process:

 

[JayyDee92]

Awesome thanks. I’ll have to give it a try I just took my tensioner pulley off because the old belt jumped off I’m running 25 tooth on top pulley and 29 tooth on crank pulley