anyone install the Ulmer spindle kit? what came with it and any pictures? He is on vacation and I would like to know if I should wait for next week to order or do something else quicker.
- Joined
- Apr 17, 2003
- Messages
- 5,391
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
If you order off the website they will get shipped still.
Kit comes with 4 bushings for in the spindle, push old bushings out of spindle, push new ones in.
Kit comes with 4 bushings for in the spindle, push old bushings out of spindle, push new ones in.
look at you working on vacation. Self employment problem I share.
So the spacers are not included? Are these the stock style with the babeted style material or like your bushing kits for the arms?.
- Joined
- Apr 17, 2003
- Messages
- 5,391
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
Stock material but 50% wider than stock (more support area). I can not make these out of the Oilite material because it's too thin and cracks.
https://shop.ulmerracing.com/Ski-Bo...&browse=-71253&shopBy=-26776&catalogId=-11683
If you order the $39.95 kit it is just the 4 bushings that go in the spindle.
If you order the $110.99 kit it is the 4 spindle housing bushings, 2 long collars that go through the spindle, and 4 large spacers for each side of spindle (virtually all you need except the bolt).
https://shop.ulmerracing.com/Ski-Bo...&browse=-71253&shopBy=-26776&catalogId=-11683
If you order the $39.95 kit it is just the 4 bushings that go in the spindle.
If you order the $110.99 kit it is the 4 spindle housing bushings, 2 long collars that go through the spindle, and 4 large spacers for each side of spindle (virtually all you need except the bolt).
Similar threads
