sierra_brad
Newbie
- Joined
- Feb 16, 2017
- Messages
- 2
- Reaction score
- 0
- Points
- 31
- Location
- New Brunswick
- Country
- Canada
- Snowmobile
- 2009 Venture RS
Looking to upgrade to the HD torsion springs for my skid on my 2011 Apex XTX. What is the weight recommendation for the upgrade? Running mine on H now and have it bottoming out some. I am 220lbs plus gear and tunnel bag. Original springs from new. Looking for thoughts.
- Joined
- Jun 1, 2004
- Messages
- 7,835
- Reaction score
- 2,034
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
mine does that when the rear shock needs servicing. once it has been serviced it should be back to normal.
if not i have a set of stock 2012 apex xtx springs i would be willing to swap you for yours as they are the heavyer set.
if not i have a set of stock 2012 apex xtx springs i would be willing to swap you for yours as they are the heavyer set.
thor452
Because I can
- Joined
- Jan 5, 2010
- Messages
- 3,029
- Reaction score
- 621
- Points
- 1,603
- Location
- Shawano,WI 54166
- Country
- USA
- Snowmobile
- 2012 Apex XTX 2017 Sidewinder LTX-LE
I did this upgrade along with 4 poss. adjusters. I used to ride on the highest setting on the stock adjusters and could find the bottom 2-3 times per ride.. now I run on 3 on the new set up and virtually never bottom out. I also installed the jack seat and when I ride with a passenger I just click it up to the 4th poss. I am 270 without gear. very happy with this upgrade.
