- Joined
- Apr 14, 2003
- Messages
- 6,539
- Reaction score
- 3,171
- Points
- 1,983
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Got this turbo Viper in my shop and the line coming from the cylinder head that feeds the turbo, the fitting is stripped and needs to be replaced. Where does one go for this fitting?
The bolt has a 5/8 head, groove with the oil hole in the middle and straight threads...roughly about an inch & a half long. It sandwiches the round oil line fitting with washers between the head of the bolt and turbo casting.
The bolt has a 5/8 head, groove with the oil hole in the middle and straight threads...roughly about an inch & a half long. It sandwiches the round oil line fitting with washers between the head of the bolt and turbo casting.
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Reaction score
- 3,171
- Points
- 1,983
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Looks like this
It's called a banjo fitting. Bolt suppliers in your area may have, or a decent sized performance shop.
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Reaction score
- 3,171
- Points
- 1,983
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Thanks bud!!!
That was my concern if I could get it local.
That was my concern if I could get it local.
Similar threads
