montanastick
Extreme
I have a attak motor that is in need a rebuild, the motor has not blown apart yet! When you remove the inspection cover on bottem of sled, oil is leaking out, it appers to have a crack in the removable cover on the bottem of the engine. if you remove this cover you see the oil pump, unknown amount of damage to engine. The engine will turn over, (not wise I know)
F/S used boat Anchor, no strings attached-- LOL
F/S used boat Anchor, no strings attached-- LOL
morrisond
Expert
Try hurricaneperformance.ca talk to Dave, I know he takes a lot of them apart. He's great at boosting there power too, which you might as well do if you have it apart, as it won't be cheap, apparently you can go as big as 1300cc.
If your cylinder walls are damaged you may be able to steel sleeve it and at least go to 1049cc using the watercraft pistons (2mm overbore).
If your cylinder walls are damaged you may be able to steel sleeve it and at least go to 1049cc using the watercraft pistons (2mm overbore).
