Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
I also just studded my LTX LE 137 , with 4/2 pattern in the middle with 1.5 stud boys .Went up to the North Shore Saturday after studding my 129 Rtx Le with a 4/2 pattern down the middle with 1.45s 6 inch carbides on the inside. Everything else is stock. 62 miles before I went. Recap on Lake with low snow in short distance was able to pull 109 mph. More to go. On groomed trails with loose sugar/ powder long wide smooth trails I was able to pin throttle wide open and hold it and topped out at 104 mph. I now have 275 miles on my sled. Traveled home today checked Secondary' to find one roller able to spin. Everything else looked good. Went out for another lake run with studs this time. I was able to pull 113 mph in short order. I have a lot more speed to go. Overall with the few studs I have it really pull hard. Very happy with stock sled so far no issues. Will take secondary apart for quick look later
I was concerned I needed a deeper lug track , but not anymore , with the studs.
OMG ! I cant tell how fast I had it going , as I am not comfortable on being able to stop quick enough , to keep it pinned long enough , AND look down to see how fast I'm going !
bleedyamaha
TY 4 Stroke Master
- Joined
- Sep 28, 2013
- Messages
- 1,490
- Location
- Northern Iowa
- Country
- USA
- Snowmobile
- 2017 Yamaha Sidewinder Rtx Le 2012 Yamaha Vector Ltx
That's funny cause I barely look at my speedometer. I don't have a clue if I have a tachometer yet. To busy trying to watch ahead.I also just studded my LTX LE 137 , with 4/2 pattern in the middle with 1.5 stud boys .
I was concerned I needed a deeper lug track , but not anymore , with the studs.
OMG ! I cant tell how fast I had it going , as I am not comfortable on being able to stop quick enough , to keep it pinned long enough , AND look down to see how fast I'm going !
ctdmax
Pro
Can I have a vender on here give me some info on some rollers please.. thanks
actionjack
TY 4 Stroke God
- Joined
- Apr 9, 2005
- Messages
- 2,511
- Location
- Westminster, Maryland
- Website
- www.inspectorjack.com
- Country
- USA
- Snowmobile
- 2017 SideWinder LTX-LE
Look in the thread about "Flat spot on. . . "Can I have a vender on here give me some info on some rollers please.. thanks
Ulmer
Hauck
And Thunder are all mentioned offering aftermarket rollers.
Michael Geil
Newbie
- Joined
- Jan 7, 2016
- Messages
- 21
- Age
- 53
- Location
- western new york
- Country
- USA
- Snowmobile
- 2016 yamaha viper mpi turbo
top speed on gps on mine is 104 mph...thought sidewinder pulled into he 120 mph rangeI traded my mpi viper in on one. It's not faster top end. But the pull is so min smoother. The engine had much smoother operation. But overall performance not a lot different
Similar threads
- Replies
- 36
- Views
- 6K