dicky2077
Veteran
I would like to know if there is a complete rear skid bushing & collar kit out there instead of ordering each bushing and collar seperate from yamaha dealer Also need a-arm bushing & spacer kit Any help would be great Thanks 
Fergie
Expert
- Joined
- Apr 13, 2003
- Messages
- 259
- Reaction score
- 1
- Points
- 591
- Location
- New Jersey-Ride Old Forge N.Y.
try ulmer racing he is a sponser on this site. http://www.ty4stroke.com/viewforum.php?f=26
Len Todd
TY 4 Stroke God
If you can't find what you want from Allen, Pioneer Performance may also be able to help you out. But, Allen is good too!
Hey dicky did you ever find a rear bushing kit? I could use one too
dicky2077
Veteran
bushings
yes I did mountain performance has the kits. Here is a link just scroll down the page & you will see them. Hope this helps
http://www.mountainperformance.com/yama ... ension.htm
yes I did mountain performance has the kits. Here is a link just scroll down the page & you will see them. Hope this helps
http://www.mountainperformance.com/yama ... ension.htm
Nice good find. 
I took my skid off last night and the bushings looked fine. They are the stock white ones that are supposedly crap.
How can I tell if they should be replaced? Or would it be a good idea to change them out regardless? My 05 RX-1 has 3900 miles.
thanks again
I took my skid off last night and the bushings looked fine. They are the stock white ones that are supposedly crap.
How can I tell if they should be replaced? Or would it be a good idea to change them out regardless? My 05 RX-1 has 3900 miles.
thanks again
dicky2077
Veteran
bushings
well at 3900 miles I would say change them but if there is no slop between the collar's and the bushings then they are still good. mine were gone at 3000 miles & most of the collar's had wear on them these plastic bushings are one of the worst idea's I have ever see really poor design.
but there skids are crap
well at 3900 miles I would say change them but if there is no slop between the collar's and the bushings then they are still good. mine were gone at 3000 miles & most of the collar's had wear on them these plastic bushings are one of the worst idea's I have ever see really poor design.
but there skids are crap
A
Anonymous
i wouldn't trust anyone named Allen 
Len Todd
TY 4 Stroke God
allenpoulin said:i wouldn't trust anyone named Allen
Care to fess up on somethin', Allen? Sort of start the year with a clean slate?
rxrider
Jan-Ove Pedersen
- Joined
- Apr 25, 2003
- Messages
- 7,355
- Reaction score
- 64
- Points
- 1,753
- Location
- Lakselv - 70N & 25E
- Country
- Norway
- Snowmobile
- 2014 Phazer XTX, 2013 Phazer RTX, 2008 Apex RTX, 2007 Warrior, 2006 Attak
Please make your order at www.ulmerracing.com or talk to Allen Ulmer directly on the phone, #s on his website.
Allen Ulmer is a paying advertiser on TY and contributes a lot to the site with his vast knowledge on Yamaha sleds.
I think allenpoulin is joking about himself beeing named Allen and that he can't be thrusted LOL Just pulling your leg allenpoulin
Allen Ulmer is a paying advertiser on TY and contributes a lot to the site with his vast knowledge on Yamaha sleds.
I think allenpoulin is joking about himself beeing named Allen and that he can't be thrusted LOL
Just pulling your leg allenpoulin
Len Todd
TY 4 Stroke God
I know he was joshin' So was I!
rxrider
Jan-Ove Pedersen
- Joined
- Apr 25, 2003
- Messages
- 7,355
- Reaction score
- 64
- Points
- 1,753
- Location
- Lakselv - 70N & 25E
- Country
- Norway
- Snowmobile
- 2014 Phazer XTX, 2013 Phazer RTX, 2008 Apex RTX, 2007 Warrior, 2006 Attak
All is good then
