08 phazer rtx reverse problems

[yamahas]

Yea I should have made it more clear. I ment the chain. Then asked how to adjust the belt but then decided I should do a search.

Thanks.

 

[Mooseman]

08 with GS belt, no shims, set at 1/8 above (hair more)= no reverse with out Fin it. + side- no engine braking and if ther is barly noticable, smother shift and very quick, lot better top end on deep snow.

I wonder if having the belt adjusted higher makes it tighter and binds the driveline when you're trying to shift in reverse. Or it's putting more torque even when idling. This could be the equivalent to shifting in reverse while at higher RPM.

 

[Ruckus]

you have to remove the side covers. Mine is set for preformance only. I have looked over this led with everyangle in thepast 2 months to get it readyto race in a limited budget. 08 with GS belt, no shims, set at 1/8 above (hair more)= no reverse with out Fin it. + side- no engine braking and if ther is barly noticable, smother shift and very quick, lot better top end on deep snow.
This is what it feels like when I ride it, http://www.youtube.com/watch?v=DKRqXiPIYi0

Are you from from Sweden?

 

[marpolsdofer]

No, I was was looking for the vidoes of there indoor snowmobile trail park. The only video I could find was this and the phazer fx indoor tunnel ride. I would like to snowmobile there, they have some good snocross racing to.
Anyway, I am leaving for Grafton.

 

[RedPhazer]

Your belt has to be at least level to git it to work. I put my belt 1/8" and lost reverese; so if I want to use it I have to moe the secondry by hand.

move the secondary by hand?? please explain?

Whilethesled is runnin, need reverse, and can not get it to engier by rocking or jumping. I will rotate the secondary by hand to take presseur of the reverse gear. Let it go and it will engage.

I know I'm a wuss... but that sounds a little dangerous while the sled is running!

 

[marpolsdofer]

Yes it can be dangerous! If your just traile riding dont do it. I just do it becaues I never really need reverse.
I grab it form the top side, but if I dont feel like taking of the clutch cover off I will use the side of the clutch and grad the braces. Just stay away from the primary.

 

[shredder]

you have to remove the side covers. Mine is set for preformance only. I have looked over this led with everyangle in thepast 2 months to get it readyto race in a limited budget. 08 with GS belt, no shims, set at 1/8 above (hair more)= no reverse with out Fin it. + side- no engine braking and if ther is barly noticable, smother shift and very quick, lot better top end on deep snow.
This is what it feels like when I ride it, http://www.youtube.com/watch?v=DKRqXiPIYi0

I am interested in what you have to say, but it would help if your post was legible...

 

[BombaPolaYama]

Your belt has to be at least level to git it to work. I put my belt 1/8" and lost reverese; so if I want to use it I have to moe the secondry by hand.

move the secondary by hand?? please explain?

Whilethesled is runnin, need reverse, and can not get it to engier by rocking or jumping. I will rotate the secondary by hand to take presseur of the reverse gear. Let it go and it will engage.

I know I'm a wuss... but that sounds a little dangerous while the sled is running!

Yeah, that's what I was thinking! surprised someone would even sugggest that manoeuver!

 

[BombaPolaYama]

you have to remove the side covers. Mine is set for preformance only. I have looked over this led with everyangle in thepast 2 months to get it readyto race in a limited budget. 08 with GS belt, no shims, set at 1/8 above (hair more)= no reverse with out Fin it. + side- no engine braking and if ther is barly noticable, smother shift and very quick, lot better top end on deep snow.
This is what it feels like when I ride it, http://www.youtube.com/watch?v=DKRqXiPIYi0

I am interested in what you have to say, but it would help if your post was legible...

That point has been made about 3X but apparently he doesn't care to make his posts easily readable....just very difficult and time consuming to try and decipher.