hereismylife
VIP Member
Is this the right kit for a 09 apex monos?
SMA-8FA95-00-00
Just wanted to make sure before buying. Also if there is something better up there?
Maybe these?
https://excellmotorsports.stores.dealerspike.com/product.aspx?zpid=6635892
SMA-8FA95-00-00
Just wanted to make sure before buying. Also if there is something better up there?
Maybe these?
https://excellmotorsports.stores.dealerspike.com/product.aspx?zpid=6635892
Last edited:
Yup. Thats the one
hereismylife
VIP Member
Yup. Thats the one
Was researching and told the bearing fail pretty quick. Not sure if this is the way to go or not because of the small wheels
turbogts22
Pro
- Joined
- Jan 16, 2021
- Messages
- 136
- Location
- Spooner, Wisconsin
- Country
- USA
- Snowmobile
- Two 2010 Phazer GT's
The bigger the wheel, the better. Those low snow kits are really small so I don't think they'd hold up too well if you like going 100mph all the time. I have them on both of our Phazers and they've been doing great so far this season with over a 1,000 miles on them. Keep in mind this is at a leisurely 40-60mph, through the woods trail speed.
turbogts22
Pro
- Joined
- Jan 16, 2021
- Messages
- 136
- Location
- Spooner, Wisconsin
- Country
- USA
- Snowmobile
- Two 2010 Phazer GT's
The other thing is to always pop the seals out on new bearings and make sure they actually have grease in them. I've personally seen bearings with little or no grease at all. They don't last too long ran dry.
12k miles on my small wheels. The key is to check them regularly and grease them when needed. The Excel wheels are great choice to add with these wheels.Was researching and told the bearing fail pretty quick. Not sure if this is the way to go or not because of the small wheels
turbogts22
Pro
- Joined
- Jan 16, 2021
- Messages
- 136
- Location
- Spooner, Wisconsin
- Country
- USA
- Snowmobile
- Two 2010 Phazer GT's
Good to hear yours have lasted. I too have read a few horror stories about them but decided to give them a try anyways. Grease in - water out seems to be helpful to bearing life I always figured.
hereismylife
VIP Member
Alot of times lots of people don't want to do extras. When I get new bearing I fill them up with Amsoil racing grease. Seems like I never have any problems then. Most just use regular grease and that will not last long. By doing this never had to replace bearings. Never understood why bearings needs replaced. I guess I now know what I am doing works and keeps on going
Mooseman
I'm not all knowing. Post your question in forum.
- Joined
- Nov 3, 2009
- Messages
- 3,958
- Location
- Greely, Ontario
- Country
- Canada
- Snowmobile
- '07 Venture MP (gone)
'07 Phazer FX (gone)
'09 Phazer GT (gone)
'10 RS Venture GT (My current ride)
'10 Nytro FX (son's)
- LOCATION
- Greely, ON Canada
Ditto for greasing however, maybe for the money, it might be worth it to go with Dupont slides instead? Those wheels worked great on my MP and the Phazers, when maintained, however my GT came with the Duponts. About double the price but basically a "set it and forget it" deal. Haven't seen any complaints here about them.
- Joined
- Jun 1, 2004
- Messages
- 7,734
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
marginal snow wheels need to be re packed every season for me. have some older sleds that use them on the track support in the tunnel and they need to be done every year. occassionaly one piles up and flat spots the wheel but have not lost one ever. just wish they still made the aluminum wheels for them still as i found the bearings last longer between re packing with them. phazer has 15000 km with them on it. my old rx is at 16000 with them on it.
Similar threads
- Replies
- 8
- Views
- 668
- Replies
- 46
- Views
- 148K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.