2016 Apex xtx extra idlers wheels help

[kanadacat]

Can anyone tell me where I can get the second set of idler wheels that mount beside the only factory set. I looked online and in the catalogues with no luck. I want the exact wheels and mounting kit.

Any part number or pics of where I need to drill would be great.

Roy

 

[darv]

where you trying to put the wheel yamaha make's marginal snow wheel kits for this. if you tell me where it will help because they have two kits.

 

[“shpecial”K]

Having the same problem, all of the marginal snow wheel kits I've seen claim to be made for at newest I've seen is a 2011 yamaha. Not sure if they changed the rail design since then so it wouldn't work?

 

[brmurph]

I don't know if you have seen these or not but they only say to 2015 https://www.ebay.ca/itm/Yamaha-snow...531985?hash=item235d70d8d1:g:LUAAAOSwp5JWUNNK . Per the pics this is not where mine are wearing.

 

[darv]

there are 2 kits there is one that has a brkt that i would use in the middle because it gives it more support and the other one is best at the front at the bend. i will look up the part # for you. but the kits i'm talking about are different than the one post above.

 

[“shpecial”K]

there are 2 kits there is one that has a brkt that i would use in the middle because it gives it more support and the other one is best at the front at the bend. i will look up the part # for you. but the kits i'm talking about are different than the one post above.

That would be great, let me know

 

[justin gallant]

I will send you pictures ..i added the ones in the front . On a 136 skid.

 

[darv]

here are the part #'s SMA-8FA95-00-01 AND SMA-8FT95-00-00 ONE of these kits you will have to do a little trimming on the block to get to fit flush against the rail. you will have too watch these wheels because these are the small ones 3.25 so the bearing only last a 1-3 years .