
Lineman735
VIP Member
- Joined
- Mar 3, 2013
- Messages
- 87
- Reaction score
- 15
- Points
- 828
- Location
- Cape Breton, Nova Scotia
- Country
- Canada
- Snowmobile
- 2016 Viper XTX LE
2010 Nytro XTX
I was doing some maintenance on my 16 XTX LE, I took apart my driveshaft caliper/bearing and it looks impossible to repack the bearing since it's so thin. From the videos I watched on doing this, I have a totally different bearing. Was this something new they put on the 16's? When I first took it off, I thought the bearing was completely blown out but once I cleaned it up, it looks like a thin bearing pressed in there. It looks like I would have to split the caliper in order to do it.