2016 Yamaha phazer mods!?

[Wundo]

Hey I’m new to this but I have a 2016 phazer x-tx and I just bought a MBRP exahaust for it other wise everything is stock and I was wonder what else I should do any thoghts!?! Please list mods for phazer!!

 

[maim]

front bumper (if you canfind one), float plate, hid head lamps from rockmeister and better skis for off trail will make it an awsome season for you.

 

[blueironranger]

Out of EVERYTHING I've done to my Phazer, I'd start with a good full protection skidplate (I have the Skinz) and upper balljoint mod. I did my balljoint mod a bit different, I removed material from the balljoint seat on A-arm instead of cutting down the balljoint so when the joint needs replacing I don't need to have it machined. If you play off-trail much I'd ditch the tuner ski as they flat out suck in powder, the Phazer/Nytro MTX ski works well.

 

[Wundo]

Out of EVERYTHING I've done to my Phazer, I'd start with a good full protection skidplate (I have the Skinz) and upper balljoint mod. I did my balljoint mod a bit different, I removed material from the balljoint seat on A-arm instead of cutting down the balljoint so when the joint needs replacing I don't need to have it machined. If you play off-trail much I'd ditch the tuner ski as they flat out suck in powder, the Phazer/Nytro MTX ski works well.

Thank you! I was looking at the skid plates from skinz but the years of the sleds seem to max out at 2010 should that matter considering mine is 2016!?

 

[Wundo]

front bumper (if you canfind one), float plate, hid head lamps from rockmeister and better skis for off trail will make it an awsome season for you.

Thank u I appreciate it!

 

[Wundo]

Out of EVERYTHING I've done to my Phazer, I'd start with a good full protection skidplate (I have the Skinz) and upper balljoint mod. I did my balljoint mod a bit different, I removed material from the balljoint seat on A-arm instead of cutting down the balljoint so when the joint needs replacing I don't need to have it machined. If you play off-trail much I'd ditch the tuner ski as they flat out suck in powder, the Phazer/Nytro MTX ski works well.

Never mind about the 2010 thing I went back on the website and mis read but thank u I just ordered the front bumper!

 

[cannondale27]

I liked ULmER’s clutching on Phazer. Worked well right out of box.

 

[cannondale27]

Oh and Axis rear shock transformed mine.

 

[cannondale27]

Being a xtx the Mountain Tech boards really are transforming too. Love mine