2017 Sidewinder EPS Install Video and Info

MrSled

Site Admin/CEO
Staff member
Joined
Apr 13, 2003
Messages
21,618
Reaction score
9,248
Points
2,103
Location
Schofield, WI
Website
www.totallyamaha.com
Country
USA
Snowmobile
2020 Sidewinder SRX
Here is the Video of the install:
Step by Step information how to install EPS (Electronic Power Steering) on your Yamaha Sidewinder 2017-current that don't originally have EPS.




There are 2 PDF's (PNG) shown, one is the info needed for you to build your own harness and the other is a the final parts lists needed with Yamaha part numbers and Cat part numbers for ordering all show at retail pricing. Most dealers and websites will give 10-15% off. If anyone is interested in my harness for quick plug and play installation or for me to do the installation for you please message me. Remember installing these in a timely matter is all based on availability of parts.

Update 11/5/24: After further review on our new 2025 EPS Sidewinder, you could reduce the size if the main harness wire to 12ga for main power and ground as well as change the trigger power wire to 18GA. I have updated the attachments.
EPS Yam-Cat.png


EPS Wiring Page 001.png

EPS Wiring Page 002.png



If you want to split your power source there is a 2 outlet splitter #1639-623 and 3 outlet splitter #1639-624

1639-623-5.jpg
1639-624-15.jpg


Update 3/6/2025
 

Attachments

Last edited:
Two Gold Stars!! Awesome work
 
Now if only there was a way to retrofit Apex/Vector power steering motors. I have a pile of them sitting around.
 
Now if only there was a way to retrofit Apex/Vector power steering motors. I have a pile of them sitting around.
I have never seen one, what do they look like. As simple as the EPS is, I am sure that it can be done as long as their is room.
 
Nicely done Tom. Pretty much exactly how my install went. I did not move the plate for the brains on the right side though.
 
Nicely done Tom. Pretty much exactly how my install went. I did not move the plate for the brains on the right side though.
Great!! I was worried about wires rubbing. Could always just zip tie a hose on that bracket edge too.
 
Great!! I was worried about wires rubbing. Could always just zip tie a hose on that bracket edge too.
I should look at that a little closer just to be sure. Thanks!
 
If anyone is interested in my harness for quick plug and play installation
Are you saying you are building harnesses to sell?

EXCELLENT video!!!! Kudos to your camera person. That is the way these DIY videos should be done.
Another reason why this site is the best.
 
Are you saying you are building harnesses to sell?

EXCELLENT video!!!! Kudos to your camera person. That is the way these DIY videos should be done.
Another reason why this site is the best.
I have enough material to build and sell a few.
 
Here is the Video of the install:
Step by Step information how to install EPS (Electronic Power Steering) on your Yamaha Sidewinder 2017-current that don't originally have EPS.




There are 2 PDF's (PNG) shown, one is the info needed for you to build your own harness and the other is a the final parts lists needed with Yamaha part numbers and Cat part numbers for ordering all show at retail pricing. Most dealers and websites will give 10-15% off. If anyone is interested in my harness for quick plug and play installation or for me to do the installation for you please message me. Remember installing these in a timely matter is all based on availability of parts.

View attachment 176825
View attachment 176826
View attachment 176827
Amazing!!! Thanks you!!
 
Thank you guys. Spread the word. We could use some more traffic, thought this might help

Thank you guys. Spread the word. We could use some more traffic, thought this might help
I would be interested in the harness you built. You mentioned you have a few that may be available?
Thanks!
 


Back
Top