4th wheel kits

[09nytro]

He mentioned it on his facebook page I believe

What's his facebook page

 

[Nytro40th]

Ulmer racing

 

[09nytro]

I've search that but didn't come up , o-well I'll find it

 

[Nytro40th]

facebook.com/pages/Ulmer-Racing/191754647571710

 

[cannondale27]

Is ulmers a solid axle?

What do you mean by solid axle ?
None of them will go though the rail because the slot where the axle would go though is to small so you will have a solid axle in the mid and spacers and two wheels then on the outside you will have spacers longer bolts and two wheels , so any kit out there that replaces the tri-hub is a great kit .

The one I got is a solid axle which goes all the way through the slot. Check it out in previous posts and here installed.

 

[09nytro]

Wow that's nice !
Who makes that one ?

 

[cannondale27]

Larson Racing. Found out about them from a AC XC racer I help.

 

[09nytro]

Very nice I must say !

I'm looking at Belanger racing ones to , it looks like he has the track adjuster coming in the other way ( from the back ) that one looks very nice too !

 

[DeerHuntr]

Can you post a link to them?

 

[Yamacat21]

Just wanted to revive this thread, anyone have any real ride time with these kits? Reviews and install notes would be appreciated.

 

[cannondale27]

350 mi and not even thinking about it. Thats good! Install can be done with skid in but would be a pain. I removed the skid since it is so easy.

 

[franklin]

I actually machined the rail to 20mm then put in a 1 piece axle with spacers and wheels on it

 

[2lapsdown]

350 mi and not even thinking about it. Thats good! Install can be done with skid in but would be a pain. I removed the skid since it is so easy.

Not sure about the other kits, but the Larson Racing kit is the one serious racers use. I worry about a lot of things, but never Dean's stuff. Cannondale is right, drop the skid and do whatever you need to do. It is stupid easy, and fast.

 

[lapster]

I went the the Larson Racing axle kit as well. thanks for the info here guys.

 

[bleedyamaha]

4 wheel kit

Just a note for those shopping wheels. I had thought that the RTX and LTX had the same wheels, the XTX the larger wheels. Learned today that the RTX has the smaller wheels, like 7 1/8, both the LTX and XTX have the larger wheels.

I was looking at arctic cat 4 wheel kit and it says 8 inch. Will these work with the ltx se that you say it is 8.4 inches. Did arctic cat just round the the number to 8 ?

I think the XTX and LTX is 8.4 size wheels