burlyviper
Expert
- Joined
- Apr 30, 2012
- Messages
- 263
- Location
- Ottawa Lake MI
- Country
- USA
- Snowmobile
- 2018 Sidewinder LTX LE, blue
2011 Apex 128, Ulmer Airbox and clutch kit, PCV, HID
1980 Exciter 300
Just wanted to share that I met the guys from Thunder Products at the Novi show this year. We talked clutching and my set up that I was still trying to dial in. They spent time with me and even after the show spent the time to give me a recommendation although I have never bought anything from them. Just returned from a quick UP trip and my clutching was spot on! Can't say enough about this level of service. Much appreciated how they support the members on TY. They'll be my first call when I buy my next new sled.
Rich Kay
TY 4 Stroke Guru
Yes, very good guys! Have there clutching in my viper and did some fine tuning with phone calls as well as in person and was a pleasure. Also talked some vintage vmax4 stuff that was very helpful also.. we went on and on , loved there passion for the sport and service.... its what is missing in most businesses!
Tarzan
TY 4 Stroke Guru
- Joined
- Oct 28, 2009
- Messages
- 861
- Age
- 51
- Location
- Norway
- Website
- www.youtube.com
- Country
- Norway
- Snowmobile
- Yamaha Nytro and SideWinder BTX
Going to use Thunder Products Weights and 911 on my Sidewinder that i have build to a race sled this summer. Will ride it with Yamaha Nytro primary and secundery cluths with around 400hp with studs. So i will see if the stock cluthses will handle the HP with studs with Thunder products stuff. Was hoping to get to buy the Pro-4 Performance Primary with Thunder Products weights in it but couldnt make the cost this year so take the chanse with the stock cluthses. I have good faith in Thunder Products weights since my last dragracer was a Nytro that is still Europe fastest Yamaha on snow-dragracing with 5,48 sek on 201m( Its sold now)
Attachments
Similar threads
