welterracer
TY 4 Stroke God
Can i get the MACK studs in 1.325 or 1.375 length?
I like to keep things economical!
Thanks
I like to keep things economical!

Thanks


- Joined
- Apr 13, 2003
- Messages
- 21,650
- Reaction score
- 9,271
- Points
- 2,103
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
JT, just down the middle, 3 per 


- Joined
- Apr 14, 2003
- Messages
- 6,539
- Reaction score
- 3,171
- Points
- 1,983
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Matty, I will be doing the same pattern as Tom, Mr sled. 168 1.175 w/ backers.
I will also need 144 for the new track in the sxr, but will stay will the 1 inch with backers.
I will also need 144 for the new track in the sxr, but will stay will the 1 inch with backers.
Hey Terry 1.175 are not long enough for a 1.25 track!!! I used 1.340 roetens and never had a problem. Except when I ran my track 4 inches loose on accident.


- Joined
- Apr 13, 2003
- Messages
- 3,158
- Reaction score
- 383
- Points
- 1,663
- Location
- Sauk Prairie, WI
- Website
- www.ty4stroke.com
Alright, heres your choices. You can mix and match studs and backers as these are all 5/16". When you decide to order tell me how many of each and we can go from there.
Roetin Hornets sold in bags of 24,96 and 144
1.180"=$1.50 Each
1.343"=$1.60 Each
Woodys Traction Masters (Gold Diggers) bags of 24,96 and 144
1.175"=$1.35 Each
1.325"=$1.55 Each
Stud Boy Power Points bags of 24,96 and 144
1.187"=$1.40 Each
1.375"=$1.50 Each
Extreme Max bags of 24,48,and 96
1.150"=$.80 Each
1.400"=$.90 Each
Mack Studs Available in packs of 48 and 96 only (similar to gold digger)
1.025"=$.85 Each (7mm)
1.075"=$.90 Each (5/16)
1.325"=$.95 Each (5/16)
Backer Plates
Stud Boy Power Plates 1.25" $.40 Each
Extreme Max square alum 1.00" $.20 Each
Woodys Spring Steel Square 1.25" $.25 Each
Woodys Alum Square 1.25" $.40 Each
Mack Support Plates $.40 each
Also, good deals on Woodys, Roetin, and Stud Boy runners including the Shaper Bar.
All Prices subjuct to Wis state sales tax (if you live here) and shipping
Roetin Hornets sold in bags of 24,96 and 144
1.180"=$1.50 Each
1.343"=$1.60 Each
Woodys Traction Masters (Gold Diggers) bags of 24,96 and 144
1.175"=$1.35 Each
1.325"=$1.55 Each
Stud Boy Power Points bags of 24,96 and 144
1.187"=$1.40 Each
1.375"=$1.50 Each
Extreme Max bags of 24,48,and 96
1.150"=$.80 Each
1.400"=$.90 Each
Mack Studs Available in packs of 48 and 96 only (similar to gold digger)
1.025"=$.85 Each (7mm)
1.075"=$.90 Each (5/16)
1.325"=$.95 Each (5/16)
Backer Plates
Stud Boy Power Plates 1.25" $.40 Each
Extreme Max square alum 1.00" $.20 Each
Woodys Spring Steel Square 1.25" $.25 Each
Woodys Alum Square 1.25" $.40 Each
Mack Support Plates $.40 each
Also, good deals on Woodys, Roetin, and Stud Boy runners including the Shaper Bar.
All Prices subjuct to Wis state sales tax (if you live here) and shipping
Wow 2 bucks for a complete 1.340 roeten. They've gone up in price. ouch


- Joined
- Apr 13, 2003
- Messages
- 3,158
- Reaction score
- 383
- Points
- 1,663
- Location
- Sauk Prairie, WI
- Website
- www.ty4stroke.com
Jason, 1.343 Hornets list for $1.95 each and the power plates list for $.51 each. Thats $2.46 a complete. Thats a 23% discount. I cant get them any lower than that...BBY
this wasn't a bitch at the speed shop just a Ouch on the price.
How much are the power point stainless?

RobX-1
VIP Member
- Joined
- Apr 13, 2003
- Messages
- 2,297
- Reaction score
- 1,481
- Points
- 1,583
- Location
- Coldwater, OH
- Country
- USA
- Snowmobile
- 18 50th Apex XT-X, 08 40th Apex LTX GT, 08 40th Nytro RTX, & 03 RX-1
BBY, you mentioned good deals on the shaper bar. I've been wanting to try these on my Simmons skis. Can you get me a price on the 4" and 6" carbides since I've been reading where some have installed the 6" on the outside and 4" on the inside...or was that the other way around.
I'll check my notes but would still need to get both 4" and 6" regardless of placement. Thanks!!

I'll check my notes but would still need to get both 4" and 6" regardless of placement. Thanks!!


Buster696
VIP Member
Matt,
I know where I going to get some Studs....!!!
I'll be putting in my order soon. These look like great prices...
I also wanted to thank you for offering some variety here, not just one kind. I know that I like the Roetin Hornets, and that is the stud that I will be ordering from you.
With the extra power that I have this year and the Ripsaw only having 2/row in stock form. I know that I need to 'reload', and add 4/row in the track with some fresh studs.
Talk with you soon...
Thanks,
--Buster696--

I know where I going to get some Studs....!!!

I'll be putting in my order soon. These look like great prices...
I also wanted to thank you for offering some variety here, not just one kind. I know that I like the Roetin Hornets, and that is the stud that I will be ordering from you.
With the extra power that I have this year and the Ripsaw only having 2/row in stock form. I know that I need to 'reload', and add 4/row in the track with some fresh studs.

Talk with you soon...

Thanks,
--Buster696--

A
Anonymous
BlueByYou2000 said:Mack Studs Available in packs of 48 and 96 only
1.075"=$.70 Each
1.325"=$.80 Each
How much for the circle backers and support washers? I am looking at purchasing 96 of the 1.325 studs.
welterracer
TY 4 Stroke God
Matt if me and my buddys (barry and maybe dan) do a small group buy would you ship them for free.. Barry needs 1.40 studs!! Me 1.325!
Let me know.. They would be shipped to 52002!
Let me know.. They would be shipped to 52002!


- Joined
- Apr 13, 2003
- Messages
- 3,158
- Reaction score
- 383
- Points
- 1,663
- Location
- Sauk Prairie, WI
- Website
- www.ty4stroke.com
Welter, depends how many your talking about. Im sure we can work something out.
RX-1 Yamaholic, Im waiting for pricing from Mack on the backers and support washers
Rob RX-1, Shaper bars are $55 for the 4.5" and $65 for the 6"
Gilbey, shoot me an email with your request and Ill send you a quote. Send to rx1matt@charter.net
jtssrx, Power Point Stainless are $1.50 for 1.375"
RX-1 Yamaholic, Im waiting for pricing from Mack on the backers and support washers
Rob RX-1, Shaper bars are $55 for the 4.5" and $65 for the 6"
Gilbey, shoot me an email with your request and Ill send you a quote. Send to rx1matt@charter.net
jtssrx, Power Point Stainless are $1.50 for 1.375"
Thanks Matt!!! 

Similar threads
- Replies
- 32
- Views
- 7K
- Replies
- 11
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.